The experimental longitudinal-and lateral-directional stability characteristics of a Langley conceptual space shuttle orbiter design were obtained for a series of inboard planform fillets in the NASA/LaRC 8-foot transonic pressure tunnel. Fillet sweep angles up to 78 deg were investigated while holding the spanwise intersection of the fillet and wing constant. The data were obtained at Mach numbers of 0.35 to 1.2 and at Reynolds numbers (depending on Mach number) of 1,000,000 to 3,200,000 per foot. The angle of attack was varied from about -2 deg to 22 deg at sideslip
An investigation was made in the Langley Continuous Flow Hypersonic Tunnel at a Mach number of 10.3 ...
A wind tunnel test of an 0.030-scale space shuttle vehicle orbiter configuration 140A/B model was co...
Data obtained from a wind tunnel test of an 0.015-scale 140 A/B configuration space shuttle vehicle ...
The experimental aerodynamic characteristics of three basic wing planforms on a conceptual orbiter f...
The experimental longitudinal and lateral-directional stability characteristics of a Langley concept...
An investigation was made in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.9 and 2.86 to...
Experimental aerodynamic investigations were conducted in the NASA/Ames 3.5-Foot Hypersonic wind Tun...
A transonic pressure tunnel test is reported on an early version of the space shuttle orbiter (desig...
Experimental aerodynamic investigations were conducted in NASA/Langley 8-Foot transonic pressure tun...
Experimental investigations were performed in a 6- by 6-Foot Supersonic wind tunnel on a 0.015-scale...
Aerodynamic investigations were conducted in a low speed wind tunnel from June 18 through June 25, 1...
The results of a wind tunnel test to determine the force, moment, and hinge-moment characteristics o...
A wind tunnel test was conducted of an 0.030 scale model of the space shuttle orbiter in a supersoni...
Experimental aerodynamic investigations were conducted on a scale model of the space shuttle orbiter...
An experimental and analytical aerodynamic program to develop predesign guides for irregular planfor...
An investigation was made in the Langley Continuous Flow Hypersonic Tunnel at a Mach number of 10.3 ...
A wind tunnel test of an 0.030-scale space shuttle vehicle orbiter configuration 140A/B model was co...
Data obtained from a wind tunnel test of an 0.015-scale 140 A/B configuration space shuttle vehicle ...
The experimental aerodynamic characteristics of three basic wing planforms on a conceptual orbiter f...
The experimental longitudinal and lateral-directional stability characteristics of a Langley concept...
An investigation was made in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.9 and 2.86 to...
Experimental aerodynamic investigations were conducted in the NASA/Ames 3.5-Foot Hypersonic wind Tun...
A transonic pressure tunnel test is reported on an early version of the space shuttle orbiter (desig...
Experimental aerodynamic investigations were conducted in NASA/Langley 8-Foot transonic pressure tun...
Experimental investigations were performed in a 6- by 6-Foot Supersonic wind tunnel on a 0.015-scale...
Aerodynamic investigations were conducted in a low speed wind tunnel from June 18 through June 25, 1...
The results of a wind tunnel test to determine the force, moment, and hinge-moment characteristics o...
A wind tunnel test was conducted of an 0.030 scale model of the space shuttle orbiter in a supersoni...
Experimental aerodynamic investigations were conducted on a scale model of the space shuttle orbiter...
An experimental and analytical aerodynamic program to develop predesign guides for irregular planfor...
An investigation was made in the Langley Continuous Flow Hypersonic Tunnel at a Mach number of 10.3 ...
A wind tunnel test of an 0.030-scale space shuttle vehicle orbiter configuration 140A/B model was co...
Data obtained from a wind tunnel test of an 0.015-scale 140 A/B configuration space shuttle vehicle ...