An experimental investigation was conducted in the MSFC 14 inch TWT to study the roll characteristics of a 0.00548 scale model of the 146 inch shuttle solid rocket booster to obtain more accurate rolling moment data on the solid rocket booster. A sensitive single component roll balance was utilized. Data were obtained for a single nose mounted sting. The angle of attack range consisted of angles from 150 deg to 190 deg; roll angles consisted of angles from 0 deg to 337 1/2 deg in increments of 22 1/2 deg; and Mach numbers were 1.46, 1.96, 2.74 and 2.48
Wind tunnel investigation at subsonic & transonic speed of static aerodynamic and control characteri...
The 0.003366 scale models of the space shuttle pressure-fed booster and booster/orbiter configuratio...
The primary objective of the test was to determine the aerodynamic increments due to the attach stru...
An experimental investigation (SA16F) was conducted in the AEDC PWT 4T to determine the entry static...
A force test of a scale model of the Space Shuttle Solid Rocket Booster was conducted in a trisonic ...
A force test of a 2.112 percent scale Space Shuttle Solid Rocket Booster (SRB), MSFC Model 454, was ...
Force tests of a 0.563 percent scale space shuttle solid rocket booster (SRB) model, MSFC Model 449,...
An experimental investigation (SA14FA, TWT 620) was conducted in the MSFC 14-inch Trisonic Wind Tunn...
The results of a pressure test of a .00548 scale 146 inch Space Shuttle Solid Rocket Booster (SRB) w...
Tests of a 2.112 percent scale model of the space shuttle solid rocket booster model were conducted ...
Experimental aerodynamic investigations were conducted in the NASA/MSFC 14 x 14 Inch Trisonic Wind T...
Data were obtained for Mach numbers from 0.6 to 3.48, angles of attack from -10 to 10 degrees, and a...
Tests conducted at NASA-Langley have shown that a small flap or strake can generate a significant am...
A test of a 0.563 percent scale space shuttle Solid Rocket Booster (SRB) model, MSFC Model 449, was ...
Experimental aerodynamic investigations were conducted in the NASA/MSFC 14-inch trisonic wind tunnel...
Wind tunnel investigation at subsonic & transonic speed of static aerodynamic and control characteri...
The 0.003366 scale models of the space shuttle pressure-fed booster and booster/orbiter configuratio...
The primary objective of the test was to determine the aerodynamic increments due to the attach stru...
An experimental investigation (SA16F) was conducted in the AEDC PWT 4T to determine the entry static...
A force test of a scale model of the Space Shuttle Solid Rocket Booster was conducted in a trisonic ...
A force test of a 2.112 percent scale Space Shuttle Solid Rocket Booster (SRB), MSFC Model 454, was ...
Force tests of a 0.563 percent scale space shuttle solid rocket booster (SRB) model, MSFC Model 449,...
An experimental investigation (SA14FA, TWT 620) was conducted in the MSFC 14-inch Trisonic Wind Tunn...
The results of a pressure test of a .00548 scale 146 inch Space Shuttle Solid Rocket Booster (SRB) w...
Tests of a 2.112 percent scale model of the space shuttle solid rocket booster model were conducted ...
Experimental aerodynamic investigations were conducted in the NASA/MSFC 14 x 14 Inch Trisonic Wind T...
Data were obtained for Mach numbers from 0.6 to 3.48, angles of attack from -10 to 10 degrees, and a...
Tests conducted at NASA-Langley have shown that a small flap or strake can generate a significant am...
A test of a 0.563 percent scale space shuttle Solid Rocket Booster (SRB) model, MSFC Model 449, was ...
Experimental aerodynamic investigations were conducted in the NASA/MSFC 14-inch trisonic wind tunnel...
Wind tunnel investigation at subsonic & transonic speed of static aerodynamic and control characteri...
The 0.003366 scale models of the space shuttle pressure-fed booster and booster/orbiter configuratio...
The primary objective of the test was to determine the aerodynamic increments due to the attach stru...