Add to ORKGA technique for producing an acid inventory control member by spraying FEP onto a partially screened carbon paper backing is discussed. Theoretical analysis of the acid management indicates that the vapor composition of 103% H3PO4 is approximately 1.0 ppm P4O10. An SEM evaluation of corrosion resistance of phenolic resins and graphite/phenolic resin composites in H3PO4 at 185 C shows specific surface etching. Carbonization of graphite/phenolic bipolar plates is achieved without blistering
The on-site system application analysis is summarized. Preparations were completed for the first tes...
A multiple-task research and development program was performed to improve the weight, life, and perf...
Alloy electrocatalysts on carbon supports were developed for hydrogen oxidation in the presence of c...
Component development has resulted in routine molding of 12 in. by 17 in. bipolar plates with 80 per...
The status of technology for the manufacturing and testing of 1200 sq. cm cell materials, components...
The technology development for materials, cells, and reformers for on site integrated energy systems...
The technology development for phosphoric acid fuel cells is summarized. The preparation, heat treat...
The development of phosphoric acid fuel cell stack components, fuel selection and processing, integr...
Reducing cost and increasing reliability were the technology drivers in both the electric utility an...
The principal effort under this program was directed at the fuel cell stack technology required to a...
Platinum sintering on phosphoric acid fuel cell cathodes is discussed. The cathode of the phosphoric...
The first phase of a planned multiphase program to develop a Phosphoric is addressed. This report de...
Legal and institutional factors affecting the development and commercial diffusion of phosphoric aci...
A phosphoric acid fuel cell (PAFC) stack design having a 10 kW power rating for operation at higher ...
A multiple task research and development program was performed to improve the weight, life, and perf...
The on-site system application analysis is summarized. Preparations were completed for the first tes...
A multiple-task research and development program was performed to improve the weight, life, and perf...
Alloy electrocatalysts on carbon supports were developed for hydrogen oxidation in the presence of c...
Component development has resulted in routine molding of 12 in. by 17 in. bipolar plates with 80 per...
The status of technology for the manufacturing and testing of 1200 sq. cm cell materials, components...
The technology development for materials, cells, and reformers for on site integrated energy systems...
The technology development for phosphoric acid fuel cells is summarized. The preparation, heat treat...
The development of phosphoric acid fuel cell stack components, fuel selection and processing, integr...
Reducing cost and increasing reliability were the technology drivers in both the electric utility an...
The principal effort under this program was directed at the fuel cell stack technology required to a...
Platinum sintering on phosphoric acid fuel cell cathodes is discussed. The cathode of the phosphoric...
The first phase of a planned multiphase program to develop a Phosphoric is addressed. This report de...
Legal and institutional factors affecting the development and commercial diffusion of phosphoric aci...
A phosphoric acid fuel cell (PAFC) stack design having a 10 kW power rating for operation at higher ...
A multiple task research and development program was performed to improve the weight, life, and perf...
The on-site system application analysis is summarized. Preparations were completed for the first tes...
A multiple-task research and development program was performed to improve the weight, life, and perf...
Alloy electrocatalysts on carbon supports were developed for hydrogen oxidation in the presence of c...