Add to ORKGPultrusion as a workable process for thermoset and thermoplastic graphite composite closed caps is discussed. The composite beam fabricator configuration is presented as are the beam cap properties
The fabrication of full-size structural rings from composite materials is described. Results of glas...
The autoclave based THERM-X(sub R) process was evaluated by cocuring complex curved panels with fram...
Progress in the mechanical/structural assembly of the beam builder is reported. The following struct...
A detailed design for a prototype, composite beam cap fabricator was established. Inputs to this des...
The lower right aluminum beam cap roll forming mill was delivered and installed in the beam builder....
The weight savings potential, of graphite-epoxy composites for secondary and medium primary aircraft...
The composite material beam builder which will produce triangular beams from pre-consolidated graphi...
A range of tasks focused on a baseline system concept is discussed. A beam builder concept developed...
The technology required to develop a beam builder which automatically fabricates long, continuous, l...
A rolltrusion process was developed for forming of a hybrid, single-ply woven graphite and glass fib...
Flat and hat section specimens of graphite/epoxy composite materials have been fabricated by the res...
An automated beam builder for the fabrication of space structures is described. The beam builder for...
A summary is given of the in-house and contract work accomplished under the CASTS Project. In July 1...
Demonstration was performed to experimentally assess the potential advantages in the processing of m...
The fabrication machine used for the rolltrusion and on-orbit forming of graphite thermoplastic (CTP...
The fabrication of full-size structural rings from composite materials is described. Results of glas...
The autoclave based THERM-X(sub R) process was evaluated by cocuring complex curved panels with fram...
Progress in the mechanical/structural assembly of the beam builder is reported. The following struct...
A detailed design for a prototype, composite beam cap fabricator was established. Inputs to this des...
The lower right aluminum beam cap roll forming mill was delivered and installed in the beam builder....
The weight savings potential, of graphite-epoxy composites for secondary and medium primary aircraft...
The composite material beam builder which will produce triangular beams from pre-consolidated graphi...
A range of tasks focused on a baseline system concept is discussed. A beam builder concept developed...
The technology required to develop a beam builder which automatically fabricates long, continuous, l...
A rolltrusion process was developed for forming of a hybrid, single-ply woven graphite and glass fib...
Flat and hat section specimens of graphite/epoxy composite materials have been fabricated by the res...
An automated beam builder for the fabrication of space structures is described. The beam builder for...
A summary is given of the in-house and contract work accomplished under the CASTS Project. In July 1...
Demonstration was performed to experimentally assess the potential advantages in the processing of m...
The fabrication machine used for the rolltrusion and on-orbit forming of graphite thermoplastic (CTP...
The fabrication of full-size structural rings from composite materials is described. Results of glas...
The autoclave based THERM-X(sub R) process was evaluated by cocuring complex curved panels with fram...
Progress in the mechanical/structural assembly of the beam builder is reported. The following struct...