Add to ORKGThe MOD-1 detail design is appended. The supporting analyses presented include a parametric system trade study, a verification of the computer codes used for rotor loads analysis, a metal blade study, and a definition of the design loads at each principal wind turbine generator interface for critical loading conditions. Shipping and assembly requirements, composite blade development, and electrical stability are also discussed
Engineering drawings and the detailed mechanical and electrical design of a horizontal-axis wind tur...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Ther...
The development associated with large wind turbine systems is briefly described. The scope of this a...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work perfo...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volu...
The Mod-1 machine was assembled without the blades, tested, and sent to the site at Boone, North Car...
The configuration development of the MOD-2 wind turbine system is presented. The MOD-2 is design opt...
Experimental test data are correlated with analyses of turbine loads and complete system behavior of...
Preliminary test data on output power versus wind speed, rotor blade loads, system dynamic behavior,...
The design, development and analysis of the 7.3 MW MOD-5A wind tunnel generator is documented. There...
The development of the MOD-2 wind turbine through acceptance testing and initial operational evaluat...
Primary results are summarized for a three-part study involving the effects of connecting a MOD-OA w...
A rotor loads computer program was used to define the steady state and cyclic loads acting on 60 ft ...
Activities leading to the detail design of a wind turbine generator having a nominal rating of 1.8 m...
The Mod 1 program objectives are defined. The Mod 1 wind turbine is described. In addition to the st...
Engineering drawings and the detailed mechanical and electrical design of a horizontal-axis wind tur...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Ther...
The development associated with large wind turbine systems is briefly described. The scope of this a...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator covering work perfo...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volu...
The Mod-1 machine was assembled without the blades, tested, and sent to the site at Boone, North Car...
The configuration development of the MOD-2 wind turbine system is presented. The MOD-2 is design opt...
Experimental test data are correlated with analyses of turbine loads and complete system behavior of...
Preliminary test data on output power versus wind speed, rotor blade loads, system dynamic behavior,...
The design, development and analysis of the 7.3 MW MOD-5A wind tunnel generator is documented. There...
The development of the MOD-2 wind turbine through acceptance testing and initial operational evaluat...
Primary results are summarized for a three-part study involving the effects of connecting a MOD-OA w...
A rotor loads computer program was used to define the steady state and cyclic loads acting on 60 ft ...
Activities leading to the detail design of a wind turbine generator having a nominal rating of 1.8 m...
The Mod 1 program objectives are defined. The Mod 1 wind turbine is described. In addition to the st...
Engineering drawings and the detailed mechanical and electrical design of a horizontal-axis wind tur...
The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Ther...
The development associated with large wind turbine systems is briefly described. The scope of this a...