The concept and design of a dynamic test platform for development and evluation of a robot vision system is discussed. The platform is to serve as a diagnostic and developmental tool for future work with the RPI Mars Rover's multi laser/multi detector vision system. The platform allows testing of the vision system while its attitude is varied, statically or periodically. The vision system is mounted on the test platform. It can then be subjected to a wide variety of simulated can thus be examined in a controlled, quantitative fashion. Defining and modeling Rover motions and designing the platform to emulate these motions are also discussed. Individual aspects of the design process are treated separately, as structural, driving linkages, and...
A preliminary design of a two-stage to orbit vehicle was conducted with the requirements to carry a ...
The Composite Development Division of the Propulsion Laboratory at Marshall Space Flight Center (MSF...
The disturbance rejection control problem for a 6-DOF (degree of freedom) PUMA manipulator mounted o...
A pressurized lunar rover is necessary for future long-term habitation of the moon. The rover must b...
An investigation was made to determine the feasibility of using an aerobrake system for manned and u...
The laser-one hazard detector system, used on the Rensselaer Mars rover, is reviewed briefly with re...
As the need for robotic manipulation in fields such as manufacturing and telerobotics increases, so ...
An ever-increasing range of sophisticated and leading-edge electronic technologies emerging into the...
Experimental verification is presented for an assumed modes model of a large, two link, flexible man...
Two designs are presented for control systems for the NASA Transport System Research Vehicle (TSRV) ...
A simulation experiment to explore the use of an augmented pictorial display to approach and land a ...
The results of study to determine the applicability of the Remote Mobile Emplacement Package (RMEP) ...
This thesis describes the single link flexible beam testbed at the CLaMS laboratory in terms of its ...
Raytheon is a defense contracting company with an electronic warfare division that is developing a r...
The Terminal Configured Vehicle (TCV) program operates a Boeing 737 modified to include a second coc...
A preliminary design of a two-stage to orbit vehicle was conducted with the requirements to carry a ...
The Composite Development Division of the Propulsion Laboratory at Marshall Space Flight Center (MSF...
The disturbance rejection control problem for a 6-DOF (degree of freedom) PUMA manipulator mounted o...
A pressurized lunar rover is necessary for future long-term habitation of the moon. The rover must b...
An investigation was made to determine the feasibility of using an aerobrake system for manned and u...
The laser-one hazard detector system, used on the Rensselaer Mars rover, is reviewed briefly with re...
As the need for robotic manipulation in fields such as manufacturing and telerobotics increases, so ...
An ever-increasing range of sophisticated and leading-edge electronic technologies emerging into the...
Experimental verification is presented for an assumed modes model of a large, two link, flexible man...
Two designs are presented for control systems for the NASA Transport System Research Vehicle (TSRV) ...
A simulation experiment to explore the use of an augmented pictorial display to approach and land a ...
The results of study to determine the applicability of the Remote Mobile Emplacement Package (RMEP) ...
This thesis describes the single link flexible beam testbed at the CLaMS laboratory in terms of its ...
Raytheon is a defense contracting company with an electronic warfare division that is developing a r...
The Terminal Configured Vehicle (TCV) program operates a Boeing 737 modified to include a second coc...
A preliminary design of a two-stage to orbit vehicle was conducted with the requirements to carry a ...
The Composite Development Division of the Propulsion Laboratory at Marshall Space Flight Center (MSF...
The disturbance rejection control problem for a 6-DOF (degree of freedom) PUMA manipulator mounted o...