Add to ORKGProgress in the mechanical/structural assembly of the beam builder is reported. The following structures were investigated: cross brace magazine/dispenser subsystem; and rolling mill supply reel, guide, and drive. The fabrication facility design and a detail design of all major subsystem components are discussed. The number of spot welds per structural joint were reduced which enables the doubling of length of truss which can be produced within known electrode life limits
A rolltrusion process was developed for forming of a hybrid, single-ply woven graphite and glass fib...
An automated beam builder for the fabrication of space structures is described. The beam builder for...
Santek's ability to recover from a schedule slip was reviewed and found satisfactory. Diagonal membe...
The lower right aluminum beam cap roll forming mill was delivered and installed in the beam builder....
The techniques, processes, and equipment required for automatic fabrication and assembly of structur...
A range of tasks focused on a baseline system concept is discussed. A beam builder concept developed...
The detailed results of all part 3 study tasks are presented. Selected analysis was performed on the...
The feasibility of fabricating beams in space and using them as components of a large, crew assemble...
The fabrication machine used for the rolltrusion and on-orbit forming of graphite thermoplastic (CTP...
The composite material beam builder which will produce triangular beams from pre-consolidated graphi...
Joining techniques for fabrication and repair of structures in extraterrestrial environmen
In June 1991 work was initiated at MSFC on an end-effector for 'Robotic Assembly of Welded Truss Str...
The techniques, processes, and equipment required for automatic fabrication and assembly of structur...
The technology required to develop a beam builder which automatically fabricates long, continuous, l...
Pultrusion as a workable process for thermoset and thermoplastic graphite composite closed caps is d...
A rolltrusion process was developed for forming of a hybrid, single-ply woven graphite and glass fib...
An automated beam builder for the fabrication of space structures is described. The beam builder for...
Santek's ability to recover from a schedule slip was reviewed and found satisfactory. Diagonal membe...
The lower right aluminum beam cap roll forming mill was delivered and installed in the beam builder....
The techniques, processes, and equipment required for automatic fabrication and assembly of structur...
A range of tasks focused on a baseline system concept is discussed. A beam builder concept developed...
The detailed results of all part 3 study tasks are presented. Selected analysis was performed on the...
The feasibility of fabricating beams in space and using them as components of a large, crew assemble...
The fabrication machine used for the rolltrusion and on-orbit forming of graphite thermoplastic (CTP...
The composite material beam builder which will produce triangular beams from pre-consolidated graphi...
Joining techniques for fabrication and repair of structures in extraterrestrial environmen
In June 1991 work was initiated at MSFC on an end-effector for 'Robotic Assembly of Welded Truss Str...
The techniques, processes, and equipment required for automatic fabrication and assembly of structur...
The technology required to develop a beam builder which automatically fabricates long, continuous, l...
Pultrusion as a workable process for thermoset and thermoplastic graphite composite closed caps is d...
A rolltrusion process was developed for forming of a hybrid, single-ply woven graphite and glass fib...
An automated beam builder for the fabrication of space structures is described. The beam builder for...
Santek's ability to recover from a schedule slip was reviewed and found satisfactory. Diagonal membe...