Add to ORKGThe investigation of creep recovery and stress relaxation in aluminum using a closed loop servo-hydraulic test system is described. The practicality of a computer controlled test system for constant plastic strain rate tension tests is demonstrated. The plastic strain rate and the magnitude of the initial strain are shown to have a noticeable effect on subsequent creep behavior of aluminum
Stress relaxation describes the reduction of stress under static or cyclic loading at a constant str...
http://deepblue.lib.umich.edu/bitstream/2027.42/8309/5/bad6903.0001.001.pdfhttp://deepblue.lib.umich...
A computer program has been developed to simulate the high temperature creep recovery–work hardening...
Creep tests were conducted by means of a closed loop servo-controlled materials test system. These t...
Creep tests were conducted by means of a closed loop servocontrolled materials test system. The stra...
Application of the endochronic theory of viscoplasticity to creep, creep recovery, and stress relaxa...
Linear viscoelastic analysis of incremental load test data on AU-4G1 aluminum alloy sheet subjected ...
Stress-relaxation ageing behaviour of peak-aged aluminium alloy 6082 (AA6082-T6) has been experiment...
Creep tests at room temperature under combined tension-torsion have been performed on thin walled tu...
The period covered by this report has been devoted to the design, construction development and cali...
Part I of this report, dated September 1965, deals mainly with the design and construction of the s...
Stress relaxation testing is often utilised for determining whether athermal straining contributes t...
Experimental creep, temperature, and strain data resulting from a laboratory experiment on a built-u...
The creep of single crystals of high-purity aluminum was investigated in the range of temperatures f...
The instantaneous strains resulting from stress changes during steady state creep of polycrystalline...
Stress relaxation describes the reduction of stress under static or cyclic loading at a constant str...
http://deepblue.lib.umich.edu/bitstream/2027.42/8309/5/bad6903.0001.001.pdfhttp://deepblue.lib.umich...
A computer program has been developed to simulate the high temperature creep recovery–work hardening...
Creep tests were conducted by means of a closed loop servo-controlled materials test system. These t...
Creep tests were conducted by means of a closed loop servocontrolled materials test system. The stra...
Application of the endochronic theory of viscoplasticity to creep, creep recovery, and stress relaxa...
Linear viscoelastic analysis of incremental load test data on AU-4G1 aluminum alloy sheet subjected ...
Stress-relaxation ageing behaviour of peak-aged aluminium alloy 6082 (AA6082-T6) has been experiment...
Creep tests at room temperature under combined tension-torsion have been performed on thin walled tu...
The period covered by this report has been devoted to the design, construction development and cali...
Part I of this report, dated September 1965, deals mainly with the design and construction of the s...
Stress relaxation testing is often utilised for determining whether athermal straining contributes t...
Experimental creep, temperature, and strain data resulting from a laboratory experiment on a built-u...
The creep of single crystals of high-purity aluminum was investigated in the range of temperatures f...
The instantaneous strains resulting from stress changes during steady state creep of polycrystalline...
Stress relaxation describes the reduction of stress under static or cyclic loading at a constant str...
http://deepblue.lib.umich.edu/bitstream/2027.42/8309/5/bad6903.0001.001.pdfhttp://deepblue.lib.umich...
A computer program has been developed to simulate the high temperature creep recovery–work hardening...