Add to ORKGRestructuring research objectives from a technical readiness demonstration program to an investigation of high risk, high payoff activities associated with producing photovoltaic modules using non-CZ sheet material is reported. Deletion of the module frame in favor of a frameless design, and modification in cell series parallel electrical interconnect configuration are reviewed. A baseline process sequence was identified for the fabrication of modules using the selected dendritic web sheet material, and economic evaluations of the sequence were completed
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
An experiment was completed to demonstrate that low ammonia concentrations in the product nitrogen s...
An assessment of S-band communication equipment includes: (1) the review and analysis of the ability...
Design work for a photovoltaic module, fabricated using single crystal silicon dendritic web sheet m...
The performance of two critical technology components required for a continuously rotatable heat pip...
A flight experiment designed to demonstrate current cryogenic heat pipe technology was defined and e...
A program was conducted to evaluate and characterize the carbon dioxide-methane (CO2-CH4) decomposit...
Pressure and heat transfer tests were conducted simulating flight conditions which the space shuttle...
The purpose of this program was to find a fire- and rot-retardant polymer/fungicide reaction product...
The test facility and initial test program developed to experimentally measure the fluid forces indu...
A physiological date telemetry system, consisting basically of a portable unit and a ground base sta...
As a development phase moves toward flight hardware, the system availability becomes an important de...
Four possible arrangements of the materials experiment carrier (MEC) and power system (PS) thermal c...
The final report for the automatic exposure control study for space sequential cameras, for the NASA...
A nitrogen supply subsystem based on the dissociation of hydrazine into a mixture of hydrogen and ni...
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
An experiment was completed to demonstrate that low ammonia concentrations in the product nitrogen s...
An assessment of S-band communication equipment includes: (1) the review and analysis of the ability...
Design work for a photovoltaic module, fabricated using single crystal silicon dendritic web sheet m...
The performance of two critical technology components required for a continuously rotatable heat pip...
A flight experiment designed to demonstrate current cryogenic heat pipe technology was defined and e...
A program was conducted to evaluate and characterize the carbon dioxide-methane (CO2-CH4) decomposit...
Pressure and heat transfer tests were conducted simulating flight conditions which the space shuttle...
The purpose of this program was to find a fire- and rot-retardant polymer/fungicide reaction product...
The test facility and initial test program developed to experimentally measure the fluid forces indu...
A physiological date telemetry system, consisting basically of a portable unit and a ground base sta...
As a development phase moves toward flight hardware, the system availability becomes an important de...
Four possible arrangements of the materials experiment carrier (MEC) and power system (PS) thermal c...
The final report for the automatic exposure control study for space sequential cameras, for the NASA...
A nitrogen supply subsystem based on the dissociation of hydrazine into a mixture of hydrogen and ni...
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
An experiment was completed to demonstrate that low ammonia concentrations in the product nitrogen s...
An assessment of S-band communication equipment includes: (1) the review and analysis of the ability...