Add to ORKGTransverse properties of fiber constituents in composites, fatigue in composite materials, matrix dominated properties of high performance composites, numerical investigation of moisture effects, numerical investigation of the micromechanics of composite fracture, advanced analysis methods, compact lug design, and the RP-1 and RP-2 sailplanes projects are discussed
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2007Thesis (M.Sc.) -- ...
Spanwise and tangential leading edge blowing as a means of controlling the position and strength of ...
This research examines relationships between annual radial growth and the status of spruce beetle (D...
An experimental program was conducted to quantify instability-induced imbedded delamination growth. ...
Dry heat resistance of bacterial spores from sterilization and assembly laborator
A Research Report submitted to the Faculty of Architecture, University of the Witwatersrand, Johann...
Eight compositions of copper-tungsten composites, eight compositions of silver-tungsten composites, ...
This paper covers the development of a new type of glass containing iron. The statistical evaluation...
The development of composite materials for aircraft applications is addressed with specific consider...
As used in this paper, humus refers to that portion of the soil organic matter peptized by four per ...
Oak Ridge National LaboratoryUnion Carbide CorporationEnergy Research and Development Administratio
This work is a typological study of modality. My research began as an attempt to find cross-linguis...
Statistical model identification techniques being developed to provide workable solutions to problem...
This investigation is the result of the author\u27s specific interest in two phase systems. In the p...
The objectives of this study were (a) to investigate the feasibility of building a very small scale ...
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2007Thesis (M.Sc.) -- ...
Spanwise and tangential leading edge blowing as a means of controlling the position and strength of ...
This research examines relationships between annual radial growth and the status of spruce beetle (D...
An experimental program was conducted to quantify instability-induced imbedded delamination growth. ...
Dry heat resistance of bacterial spores from sterilization and assembly laborator
A Research Report submitted to the Faculty of Architecture, University of the Witwatersrand, Johann...
Eight compositions of copper-tungsten composites, eight compositions of silver-tungsten composites, ...
This paper covers the development of a new type of glass containing iron. The statistical evaluation...
The development of composite materials for aircraft applications is addressed with specific consider...
As used in this paper, humus refers to that portion of the soil organic matter peptized by four per ...
Oak Ridge National LaboratoryUnion Carbide CorporationEnergy Research and Development Administratio
This work is a typological study of modality. My research began as an attempt to find cross-linguis...
Statistical model identification techniques being developed to provide workable solutions to problem...
This investigation is the result of the author\u27s specific interest in two phase systems. In the p...
The objectives of this study were (a) to investigate the feasibility of building a very small scale ...
Tez (Yüksek Lisans) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2007Thesis (M.Sc.) -- ...
Spanwise and tangential leading edge blowing as a means of controlling the position and strength of ...
This research examines relationships between annual radial growth and the status of spruce beetle (D...