An equation was derived for the strain energy release rate, G, associated with local delamination growth from a matrix ply crack. The critical GC for edge delamination onset in 25/902s graphite epoxy laminates was measured and used in this equation to predict local delamination onset strains in 25/90ns, n = 4, 6, 8 laminates. A simple technique for predicting strain concentrations in the primary load bearing plies near local delaminations was developed. These strain concentrations were responsible for reduced laminate nominal failure strains in laminates containing local delaminations. The influence of edge delamination and matrix crack tip delamination on laminate stiffness and strength was compared
Two different families of graphite/epoxy laminates with similar layups but different stacking sequen...
Delamination is the most commonly observed failure mode in composite rotorcraft dynamic components. ...
This paper reviews our understanding of the influence of delamination on the fracture sequence and f...
A shear deformation model was developed to analyze local delaminations growing from transverse crack...
The onset and growth of delaminations in unnotched (+ or - 30/+ or - 30/90/90 bar) sub S graphite ep...
An analysis utilizing laminated plate theory is developed to calculate the strain energy release rat...
Delamination growth in compressively loaded composite laminates was studied analytically and experim...
Delamination is a predominant failure mode in continuous fiber reinforced laminated composite struct...
The effect of the stress-free edge on the growth of local delaminations initiating from a matrix cra...
Constant amplitude tension-tension fatigue tests were conducted on AS4/3501-6 graphite/epoxy (02/ th...
A tapered composite laminate subjected to tension load was analyzed using the finite-element method....
Quasi-static tension tests were conducted on AS4/3501-6 graphite epoxy laminates. Dye penetrant enha...
Strain energy release rates for edge delaminated composite laminates were obtained using quasi 3 dim...
Fracture mechanics has been found to be a useful tool for understanding composite delamination. Anal...
This study focused on characterizing matrix cracking and delamination behavior in multidirectional l...
Two different families of graphite/epoxy laminates with similar layups but different stacking sequen...
Delamination is the most commonly observed failure mode in composite rotorcraft dynamic components. ...
This paper reviews our understanding of the influence of delamination on the fracture sequence and f...
A shear deformation model was developed to analyze local delaminations growing from transverse crack...
The onset and growth of delaminations in unnotched (+ or - 30/+ or - 30/90/90 bar) sub S graphite ep...
An analysis utilizing laminated plate theory is developed to calculate the strain energy release rat...
Delamination growth in compressively loaded composite laminates was studied analytically and experim...
Delamination is a predominant failure mode in continuous fiber reinforced laminated composite struct...
The effect of the stress-free edge on the growth of local delaminations initiating from a matrix cra...
Constant amplitude tension-tension fatigue tests were conducted on AS4/3501-6 graphite/epoxy (02/ th...
A tapered composite laminate subjected to tension load was analyzed using the finite-element method....
Quasi-static tension tests were conducted on AS4/3501-6 graphite epoxy laminates. Dye penetrant enha...
Strain energy release rates for edge delaminated composite laminates were obtained using quasi 3 dim...
Fracture mechanics has been found to be a useful tool for understanding composite delamination. Anal...
This study focused on characterizing matrix cracking and delamination behavior in multidirectional l...
Two different families of graphite/epoxy laminates with similar layups but different stacking sequen...
Delamination is the most commonly observed failure mode in composite rotorcraft dynamic components. ...
This paper reviews our understanding of the influence of delamination on the fracture sequence and f...