Fuel containment and damage tolerance in large composite primary aircraft structures

Technical problems related to fuel containment and damage tolerance of composite material wings for transport aircraft was investigated. The major tasks are the following: (1) the preliminary design of damage tolerant wing surface using composite materials; (2) the evaluation of fuel sealing and lightning protection methods for a composite material wing; and (3) an experimental investigation of the damage tolerant characteristics of toughened resin graphite/epoxy materials. The design concepts investigated for the upper and lower surfaces of a composite wing for a transport aircraft are presented and the relationship between weight savings and the design allowable strain used within the analysis is discussed. Experiments which compare the fuel sealing characteristics of bolt-bonded joints and bolted joints sealed with a polysulphide sealant are reviewed. Data from lightning strike tests on stiffened and unstiffened graphite/epoxy panels are presented. A wide variety of coupon tests were conducted to evaluate the relative damage tolerance of toughened resin graphite/epoxies. Data from these tests are presented and their relevance to the wing surface design concepts are discussed