A jointly optimized coded modulation system is described which was designed, built, and tested by COMSAT Laboratories for NASA LeRC which provides a bandwidth efficiency of 2 bits/s/Hz at an information rate of 160 Mbit/s. A high speed rate 8/9 encoder with a Viterbi decoder and an Octal PSK modem are used to achieve this. The BER performance is approximately 1 dB from the theoretically calculated value for this system at a BER of 5 E-7 under nominal conditions. The system operates in burst mode for downlink applications and tests have demonstrated very little degradation in performance with frequency and level offset. Unique word miss rate measurements were conducted which demonstrate reliable acquisition at low values of Eb/No. Codec self...
Journal ArticleEGOR, an entry in the 1994 AAAI Robot Competition, was built by ate am from the Depar...
Today, the Internet of Things (IoT) refers to a concept of connecting any devices on network where e...
Forced frequency stabilization techniques of self-injection locking (SIL) and self-phase locked loop...
Satellite on-board processing is needed to efficiently service multiple users while at the same time...
This project is oriented to the development of a Supervisory, Control and Data Acquisition (SCADA) ...
This is an independent investigation that evaluates the single event destructive and transient susce...
Test process, milestones and inputs are unknowns to first-time users of the EMI/EMC Test Facility. T...
Within the framework of inductive technology, this master’s thesis represents the conclusion of seve...
This document reports the status of the NASA Electronic Parts and Packaging (NEPP) Double Data Rate ...
The Emergency Vehicle Alert System (EVAS) program is sponsored by the NASA/MSFC Technology Utilizati...
The goal of this work was to design and test a functional proof of concept of a high frequency DC to...
A future implementation of unmanned aerial vehicle (UAV) operations is having a single operator co...
The topics described in this thesis are inherent to safety-relevant systems architectures for heavy-...
Thermophysical properties of materials must be known for proper design, test, and application of new...
This report summarizes the work performed on the 68 HP electro-mechanical actuator (EMA) system deve...
Journal ArticleEGOR, an entry in the 1994 AAAI Robot Competition, was built by ate am from the Depar...
Today, the Internet of Things (IoT) refers to a concept of connecting any devices on network where e...
Forced frequency stabilization techniques of self-injection locking (SIL) and self-phase locked loop...
Satellite on-board processing is needed to efficiently service multiple users while at the same time...
This project is oriented to the development of a Supervisory, Control and Data Acquisition (SCADA) ...
This is an independent investigation that evaluates the single event destructive and transient susce...
Test process, milestones and inputs are unknowns to first-time users of the EMI/EMC Test Facility. T...
Within the framework of inductive technology, this master’s thesis represents the conclusion of seve...
This document reports the status of the NASA Electronic Parts and Packaging (NEPP) Double Data Rate ...
The Emergency Vehicle Alert System (EVAS) program is sponsored by the NASA/MSFC Technology Utilizati...
The goal of this work was to design and test a functional proof of concept of a high frequency DC to...
A future implementation of unmanned aerial vehicle (UAV) operations is having a single operator co...
The topics described in this thesis are inherent to safety-relevant systems architectures for heavy-...
Thermophysical properties of materials must be known for proper design, test, and application of new...
This report summarizes the work performed on the 68 HP electro-mechanical actuator (EMA) system deve...
Journal ArticleEGOR, an entry in the 1994 AAAI Robot Competition, was built by ate am from the Depar...
Today, the Internet of Things (IoT) refers to a concept of connecting any devices on network where e...
Forced frequency stabilization techniques of self-injection locking (SIL) and self-phase locked loop...