The damage mechanisms of a laminated, continuous SiC fiber reinforced Ti-15V-3Cr-3Al-3Sn (Ti-15-3) composite were investigated. Specimens consisting of unidirectional as well as cross-ply laminates were pulled in tension to failure at room temperature and 427 C and subsequently examined metallographically. Selected specimens were interrupted at various strain increments and examined to document the development of damage. When possible, a micromechanical stress analysis was performed to aid in the explanation of the observed damage. The analyses provide average constituent microstresses and laminate stresses and strains. It was found that the damage states were dependent upon the fiber architecture
The current work formulated a micromechanical analysis of a cross-ply laminate and calculated the th...
The effect of heat treatment on material properties of SiC/Ti-15-3 was measured by vibration tests. ...
Computational simulation procedures are described to evaluate the composite microfracture behavior, ...
An experimental method is described which allows for the observation of slip bands due to matrix pla...
Cross ply laminate behavior of Ti-15V-3Cr-3Al-3Sn (Ti-15-3) matrix reinforced with continuous silico...
Composite specimens of titanium-15-3 matrix reinforced with continuous SCS-6 silicon carbide fibers ...
Due to the character of the original source materials and the nature of batch digitization, quality ...
The nonlinear stress strain behavior of 90 degree/0 degree sub 2s, SiC/Ti-15-3 composite laminate wa...
Thermomechanical testing techniques recently developed for monolithic structural alloys were success...
An investigation was undertaken to study the inelastic deformation mechanisms in (0)(sub 8) and (90)...
Several layups of SCS-6/Ti-15-3 composites were investigated. Fatigue tests were conducted and analy...
The oxidation and aging behaviors of a continuous fiber SiC/Ti-15V-3Cr-3Sn-3Al composite (SiC/Ti-15-...
The deformation mechanisms of a Ti 15-3/SCS6 (SiC fiber) metal matrix composite (MMC) were investiga...
The role of fiber/matrix interface strength, residual thermal stresses, and fiber and matrix propert...
A silicon carbide fiber reinforced titanium (Ti-15V-3Cr-3Sn-3Al) composite is metallographically exa...
The current work formulated a micromechanical analysis of a cross-ply laminate and calculated the th...
The effect of heat treatment on material properties of SiC/Ti-15-3 was measured by vibration tests. ...
Computational simulation procedures are described to evaluate the composite microfracture behavior, ...
An experimental method is described which allows for the observation of slip bands due to matrix pla...
Cross ply laminate behavior of Ti-15V-3Cr-3Al-3Sn (Ti-15-3) matrix reinforced with continuous silico...
Composite specimens of titanium-15-3 matrix reinforced with continuous SCS-6 silicon carbide fibers ...
Due to the character of the original source materials and the nature of batch digitization, quality ...
The nonlinear stress strain behavior of 90 degree/0 degree sub 2s, SiC/Ti-15-3 composite laminate wa...
Thermomechanical testing techniques recently developed for monolithic structural alloys were success...
An investigation was undertaken to study the inelastic deformation mechanisms in (0)(sub 8) and (90)...
Several layups of SCS-6/Ti-15-3 composites were investigated. Fatigue tests were conducted and analy...
The oxidation and aging behaviors of a continuous fiber SiC/Ti-15V-3Cr-3Sn-3Al composite (SiC/Ti-15-...
The deformation mechanisms of a Ti 15-3/SCS6 (SiC fiber) metal matrix composite (MMC) were investiga...
The role of fiber/matrix interface strength, residual thermal stresses, and fiber and matrix propert...
A silicon carbide fiber reinforced titanium (Ti-15V-3Cr-3Sn-3Al) composite is metallographically exa...
The current work formulated a micromechanical analysis of a cross-ply laminate and calculated the th...
The effect of heat treatment on material properties of SiC/Ti-15-3 was measured by vibration tests. ...
Computational simulation procedures are described to evaluate the composite microfracture behavior, ...