The primary objective of this research is to develop an efficient and robust trajectory optimization tool for the optimal ascent problem of the National Aerospace Plane (NASP). This report is organized in the following order to summarize the complete work: Section two states the formulation and models of the trajectory optimization problem. An inverse dynamics approach to the problem is introduced in Section three. Optimal trajectories corresponding to various conditions and performance parameters are presented in Section four. A midcourse nonlinear feedback controller is developed in Section five. Section six demonstrates the performance of the inverse dynamics approach and midcourse controller during disturbances. Section seven discusses ...
Two orbit simulations, one representing the actual Geopotential Research Mission (GRM) orbit and the...
An advanced ascent guidance algorithm for rocket-powered launch vehicles is developed. The ascent g...
A structural design study was made, to assess the relative merits of various metallic structural con...
The objective of this second phase research is to investigate the optimal ascent trajectory for the ...
The work completed to date is comprised of the following: a simple vehicle model representative of t...
Control and nonlinear estimation techniques applied to optimal guidance of low thrust spacecraft, pl...
A linear aircraft model for a rigid aircraft of constant mass flying over a flat, nonrotating earth ...
An integrated multidisciplinary optimization procedure is developed for application to rotary wing a...
A flightworthy active control landing gear system for a supersonic aircraft was designed to minimize...
An integrated autopilot/autothrottle was designed for flight test on the NASA TSRV B-737 aircraft. T...
This technical memorandum contains brief technical papers describing research and technology develop...
A numerical optimization technique is used to fully automate the trajectory design process for an sy...
Theoretical and experimental developments in the aeroelastic and aeromechanical stability of helicop...
Selected research and technology activities at Ames Research Center, including the Moffett Field sit...
Reusable, oxidation-protected reinforced carbon-carbon (RCC) has been successfully flown on all Shut...
Two orbit simulations, one representing the actual Geopotential Research Mission (GRM) orbit and the...
An advanced ascent guidance algorithm for rocket-powered launch vehicles is developed. The ascent g...
A structural design study was made, to assess the relative merits of various metallic structural con...
The objective of this second phase research is to investigate the optimal ascent trajectory for the ...
The work completed to date is comprised of the following: a simple vehicle model representative of t...
Control and nonlinear estimation techniques applied to optimal guidance of low thrust spacecraft, pl...
A linear aircraft model for a rigid aircraft of constant mass flying over a flat, nonrotating earth ...
An integrated multidisciplinary optimization procedure is developed for application to rotary wing a...
A flightworthy active control landing gear system for a supersonic aircraft was designed to minimize...
An integrated autopilot/autothrottle was designed for flight test on the NASA TSRV B-737 aircraft. T...
This technical memorandum contains brief technical papers describing research and technology develop...
A numerical optimization technique is used to fully automate the trajectory design process for an sy...
Theoretical and experimental developments in the aeroelastic and aeromechanical stability of helicop...
Selected research and technology activities at Ames Research Center, including the Moffett Field sit...
Reusable, oxidation-protected reinforced carbon-carbon (RCC) has been successfully flown on all Shut...
Two orbit simulations, one representing the actual Geopotential Research Mission (GRM) orbit and the...
An advanced ascent guidance algorithm for rocket-powered launch vehicles is developed. The ascent g...
A structural design study was made, to assess the relative merits of various metallic structural con...