The flight software developed for the Flight Management/Flight Controls (FM/FC) MicroVAX computer used on the Transport Systems Research Vehicle for Advanced Transport Operating Systems (ATOPS) research is described. The FM/FC software computes navigation position estimates, guidance commands, and those commands issued to the control surfaces to direct the aircraft in flight. Various modes of flight are provided for, ranging from computer assisted manual modes to fully automatic modes including automatic landing. A high-level system overview as well as a description of each software module comprising the system is provided. Digital systems diagrams are included for each major flight control component and selected flight management functions
A computerized human engineered inspection technique is developed for use by FAA inspectors in evalu...
Proposed concepts for the next generation of combat helicopters are to be embodied in a complex, hig...
This report documents the procedures for utilizing and maintaining the Reliability & Maintainability...
The Flight Management/Flight Controls (FM/FC) software for the Norden 2 (PDP-11/70M) computer instal...
A technique to add the time constraint to the automatic descent feature of the existing L-1011 aircr...
The extension of the NASA Ames-Dryden remotely augmented vehicle (RAV) facility to accommodate fligh...
The Advanced Cockpit Controls/Advanced Flight Control System (ACC/AFCS) study was conducted by the B...
Two highly maneuverable aircraft technology (HiMAT) remotely piloted vehicles were flown a total of ...
Analysis, modeling, and simulations were conducted as part of a multiyear investigation of the more ...
A simple, airborne, flight-management descent algorithm was developed and programmed into a small pr...
Flight tests were carried out to assess the feasibility of piloted steep curved, and decelerating ap...
A flightworthy active control landing gear system for a supersonic aircraft was designed to minimize...
Engineers and scientists in the advanced fighter technology integration (AFTI) F-16 program investig...
A study of flying quality requirements for air breathing aerospacecraft gives special emphasis to th...
A preliminary definition of a concept for an automated system is presented that will support the eff...
A computerized human engineered inspection technique is developed for use by FAA inspectors in evalu...
Proposed concepts for the next generation of combat helicopters are to be embodied in a complex, hig...
This report documents the procedures for utilizing and maintaining the Reliability & Maintainability...
The Flight Management/Flight Controls (FM/FC) software for the Norden 2 (PDP-11/70M) computer instal...
A technique to add the time constraint to the automatic descent feature of the existing L-1011 aircr...
The extension of the NASA Ames-Dryden remotely augmented vehicle (RAV) facility to accommodate fligh...
The Advanced Cockpit Controls/Advanced Flight Control System (ACC/AFCS) study was conducted by the B...
Two highly maneuverable aircraft technology (HiMAT) remotely piloted vehicles were flown a total of ...
Analysis, modeling, and simulations were conducted as part of a multiyear investigation of the more ...
A simple, airborne, flight-management descent algorithm was developed and programmed into a small pr...
Flight tests were carried out to assess the feasibility of piloted steep curved, and decelerating ap...
A flightworthy active control landing gear system for a supersonic aircraft was designed to minimize...
Engineers and scientists in the advanced fighter technology integration (AFTI) F-16 program investig...
A study of flying quality requirements for air breathing aerospacecraft gives special emphasis to th...
A preliminary definition of a concept for an automated system is presented that will support the eff...
A computerized human engineered inspection technique is developed for use by FAA inspectors in evalu...
Proposed concepts for the next generation of combat helicopters are to be embodied in a complex, hig...
This report documents the procedures for utilizing and maintaining the Reliability & Maintainability...