Theory and experiment were compared and found in good agreement for the elastic buckling under combined stresses of long flat plates with integral waffle-like stiffening in a variety of configurations. For such flat plates, 45 degree waffle stiffening was found to be the most effective of the configurations for the proportions considered over the widest range of combinations of compression and shear
A parametric study of the buckling behavior of infinitely long symmetrically laminated anisotropic p...
Buckling and postbuckling results are presented for compression-loaded simply-supported aluminum pla...
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineerin...
Theory and experiment were compared and found in good agreement for the elastic Buckling under combi...
Theory and experiment were compared and found in good agreement for the elastic buckling under combi...
Formulas are derived for the fifteen elastic constants associated with bending, stretching, twisting...
On the basis of modern plasticity considerations, a unified theory of plastic buckling applicable to...
Since mid 30s (Theory of Elastic Stability, Timoshenko, 1936) up to now, buckling of plates subjecte...
Compression tests were conducted on 247 panels with Z-section stiffeners and 304 panels with hat-sec...
Determination of minimum weight shape and stiffening configuration for doubly curved shells subjecte...
This report gives a comparison of the accuracy of the three methods for calculating the compressive ...
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1991.In...
A stability analysis is made of a long flat rectangular plate subjected to a uniform longitudinal co...
The various factors governing buckling of flat plates are critically reviewed and the results are su...
Waffle panels are often used on fuselage structures such as that of the Space Shuttle. The waffle pa...
A parametric study of the buckling behavior of infinitely long symmetrically laminated anisotropic p...
Buckling and postbuckling results are presented for compression-loaded simply-supported aluminum pla...
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineerin...
Theory and experiment were compared and found in good agreement for the elastic Buckling under combi...
Theory and experiment were compared and found in good agreement for the elastic buckling under combi...
Formulas are derived for the fifteen elastic constants associated with bending, stretching, twisting...
On the basis of modern plasticity considerations, a unified theory of plastic buckling applicable to...
Since mid 30s (Theory of Elastic Stability, Timoshenko, 1936) up to now, buckling of plates subjecte...
Compression tests were conducted on 247 panels with Z-section stiffeners and 304 panels with hat-sec...
Determination of minimum weight shape and stiffening configuration for doubly curved shells subjecte...
This report gives a comparison of the accuracy of the three methods for calculating the compressive ...
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1991.In...
A stability analysis is made of a long flat rectangular plate subjected to a uniform longitudinal co...
The various factors governing buckling of flat plates are critically reviewed and the results are su...
Waffle panels are often used on fuselage structures such as that of the Space Shuttle. The waffle pa...
A parametric study of the buckling behavior of infinitely long symmetrically laminated anisotropic p...
Buckling and postbuckling results are presented for compression-loaded simply-supported aluminum pla...
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineerin...