Report presents the results of wind tunnel tests of propellers that examined the influence of the following characteristics: (1) nominal pitch ratio 1.3 combined with a certain number of the more common or standard forms and proportions; (2) driving face slightly rounded or convex; (3) change in the location of the maximum thickness ordinate of the blade section; (4) pushing forward the leading edge of the blade, thus giving a rounded convex surface on the leading side of the driving face. (5) a series of values for the constant "angle of attack" in forming propellers with radially increasing pitch. In accordance with these purposes tests were carried out on 28 propellers
The purpose of the investigation covered by this report was the examination of the degree of approac...
This investigation was made for the purpose of determining the characteristics of five full-scale pr...
This report contains artificial aerodynamic characteristics of a set of propeller sections to be use...
This report states the results of investigations made upon numerous propeller models at the request ...
Report presents the results of wind tunnel tests of propellers that examined the influence of the fo...
This report is a continuation of NACA Technical Report 14. It presents the results of an experimenta...
The tests on these model propellers were undertaken for the purpose of determining the performance c...
This report gives the full-scale aerodynamic characteristics of five different aluminum alloy propel...
The purposes of the experimental investigation on the performance of air propellers described in thi...
Aerodynamic tests were made of seven full-scale 10-foot-diameter propellers of recent design compris...
An adjustable blade metal propeller was tested at five different angle settings, forming a series va...
This report describes the tests of five adjustable blade metal model propellers both in a free wind ...
This note describes tests of an adjustable blade metal model propeller, both in a free wind stream a...
Wind-tunnel tests are reported of six 3-blade 10-foot propellers operated in front of a liquid-coole...
This report contains the results of tests to determine the thrust (pull) and torque characteristics ...
The purpose of the investigation covered by this report was the examination of the degree of approac...
This investigation was made for the purpose of determining the characteristics of five full-scale pr...
This report contains artificial aerodynamic characteristics of a set of propeller sections to be use...
This report states the results of investigations made upon numerous propeller models at the request ...
Report presents the results of wind tunnel tests of propellers that examined the influence of the fo...
This report is a continuation of NACA Technical Report 14. It presents the results of an experimenta...
The tests on these model propellers were undertaken for the purpose of determining the performance c...
This report gives the full-scale aerodynamic characteristics of five different aluminum alloy propel...
The purposes of the experimental investigation on the performance of air propellers described in thi...
Aerodynamic tests were made of seven full-scale 10-foot-diameter propellers of recent design compris...
An adjustable blade metal propeller was tested at five different angle settings, forming a series va...
This report describes the tests of five adjustable blade metal model propellers both in a free wind ...
This note describes tests of an adjustable blade metal model propeller, both in a free wind stream a...
Wind-tunnel tests are reported of six 3-blade 10-foot propellers operated in front of a liquid-coole...
This report contains the results of tests to determine the thrust (pull) and torque characteristics ...
The purpose of the investigation covered by this report was the examination of the degree of approac...
This investigation was made for the purpose of determining the characteristics of five full-scale pr...
This report contains artificial aerodynamic characteristics of a set of propeller sections to be use...