Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional unswept wing in a circular or rectangular wind tunnel. The theory takes account of the effects of the wake and of the compressibility of the fluid, and is based on the assumption that the dimensions of the model are small in comparison with those of the tunnel throat. Formulas are given for correcting a number of the quantities, such as dynamic pressure and Mach number, measured in wing-tunnel tests. The report presents a summary and unification of the existing literature on the subject
Theoretical tunnel-wall corrections are derived for an airfoil of finite thickness and camber in a t...
In the vicinity of a body in a wind tunnel the displacement effect of the wake, due to the finite di...
Wing alone models are usually tested in wind tunnels for aerospace applications like aircraft and hy...
Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional,...
Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional ...
Theoretical blochwgecorrectian~are prestnted for a body of resolution and for a three-dimensionaluns...
Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional ...
A review of existing publications on wind-tunnel corrections is followed by an approximate method fo...
Detailed methods are presented for determining the corrections to results from wind-tunnel tests of ...
Summary: The effective change in the velocity of flow past a wing section, caused by the presence of...
Sophisticated methods have become available for computing wind tunnel boundary corrections; this has...
The degree to which experimental results obtained under choking conditions in a wind tunnel with sol...
Experimental data were obtained in two wind tunnels for 13 models over a Mach number range from 0.70...
Wing alone models are usually tested in wind tunnels for aerospace applications like aircraft and hy...
Wing alone models are usually tested in wind tunnels for aerospace applications like aircraft and hy...
Theoretical tunnel-wall corrections are derived for an airfoil of finite thickness and camber in a t...
In the vicinity of a body in a wind tunnel the displacement effect of the wake, due to the finite di...
Wing alone models are usually tested in wind tunnels for aerospace applications like aircraft and hy...
Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional,...
Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional ...
Theoretical blochwgecorrectian~are prestnted for a body of resolution and for a three-dimensionaluns...
Theoretical blockage corrections are presented for a body of revolution and for a three-dimensional ...
A review of existing publications on wind-tunnel corrections is followed by an approximate method fo...
Detailed methods are presented for determining the corrections to results from wind-tunnel tests of ...
Summary: The effective change in the velocity of flow past a wing section, caused by the presence of...
Sophisticated methods have become available for computing wind tunnel boundary corrections; this has...
The degree to which experimental results obtained under choking conditions in a wind tunnel with sol...
Experimental data were obtained in two wind tunnels for 13 models over a Mach number range from 0.70...
Wing alone models are usually tested in wind tunnels for aerospace applications like aircraft and hy...
Wing alone models are usually tested in wind tunnels for aerospace applications like aircraft and hy...
Theoretical tunnel-wall corrections are derived for an airfoil of finite thickness and camber in a t...
In the vicinity of a body in a wind tunnel the displacement effect of the wake, due to the finite di...
Wing alone models are usually tested in wind tunnels for aerospace applications like aircraft and hy...