This project is a continuation of the work performed in the summers of 1991 and 1992, during which a 9-block structured grid for the computational domain around each of the four NTF 65-degree Delta Wing models with the sting mount were created. The objective of the project is to validate and supplement the test data on the wing models by computing the viscous flow field about the models
Two complementary procedures were developed to calculate the viscous supersonic flow over conical sh...
area of interest for flow control due to coherent vortical structures existing on the leeward side o...
The transonic Navier-Stokes code was used to simulate flow fields about isolated wings for workshop ...
Models of four delta wings were built and tested in the 8 x 8 ft Transonic Wind Tunnel at LaRC. The ...
Viscous flow past a wind tunnel model of a 65-degree swept angle Delta wing at transonic speeds is b...
An explicit multi-stage Runge-Kutta time-stepping scheme with cellcentred finite volume spatial disc...
The feasibility was determined of incorporating the Navier-Stokes computational code, CFL3D, into th...
Results are present here for viscous transonic flow over aerofoils to demontrate the capabilities of...
Euler and Navier-Stokes results are presented for a blunt delta wing at Mach 7.15 and 300 angle of ...
The viscous, transonic flow development around the SKF 1.1 supercritical aerofoil section, in clean ...
An investigation was conducted to study in detail the vortical flow over the leeward side of a 70 de...
A full Navier-Stokes solver has been used to model transonic flow over three airfoil sections. The m...
Results from the Viscous Transonic Airfoil Workshop are compared with each other and with experiment...
An embedded grid algorithm for the Euler and/or Navier-Stokes equations is developed and applied to ...
Several computational studies are currently being pursued that focus on various aspects of represent...
Two complementary procedures were developed to calculate the viscous supersonic flow over conical sh...
area of interest for flow control due to coherent vortical structures existing on the leeward side o...
The transonic Navier-Stokes code was used to simulate flow fields about isolated wings for workshop ...
Models of four delta wings were built and tested in the 8 x 8 ft Transonic Wind Tunnel at LaRC. The ...
Viscous flow past a wind tunnel model of a 65-degree swept angle Delta wing at transonic speeds is b...
An explicit multi-stage Runge-Kutta time-stepping scheme with cellcentred finite volume spatial disc...
The feasibility was determined of incorporating the Navier-Stokes computational code, CFL3D, into th...
Results are present here for viscous transonic flow over aerofoils to demontrate the capabilities of...
Euler and Navier-Stokes results are presented for a blunt delta wing at Mach 7.15 and 300 angle of ...
The viscous, transonic flow development around the SKF 1.1 supercritical aerofoil section, in clean ...
An investigation was conducted to study in detail the vortical flow over the leeward side of a 70 de...
A full Navier-Stokes solver has been used to model transonic flow over three airfoil sections. The m...
Results from the Viscous Transonic Airfoil Workshop are compared with each other and with experiment...
An embedded grid algorithm for the Euler and/or Navier-Stokes equations is developed and applied to ...
Several computational studies are currently being pursued that focus on various aspects of represent...
Two complementary procedures were developed to calculate the viscous supersonic flow over conical sh...
area of interest for flow control due to coherent vortical structures existing on the leeward side o...
The transonic Navier-Stokes code was used to simulate flow fields about isolated wings for workshop ...