The performance and distortion levels of the right inlet of the F/A-18A High Alpha Research Vehicle were assessed during maneuvers with rapidly changing angle-of-attack at the NASA Dryden Flight Research Center, Edwards, California. The distortion levels were compared with those produced by current inlet-engine compatibility evaluation techniques. The objective of these analyses was to determine whether the results obtained for steady aerodynamic conditions were adequate to describe the inlet-generated distortion levels that occur during rapid aircraft maneuvers. The test data were obtained during 46 dynamic maneuvers at Mach numbers of 0.3 and 0.4. Levels of inlet recovery, peak dynamic circumferential distortion, and peak dynamic radial d...
A wind tunnel investigation was conducted to determine the amplitude and spatial distribution of ste...
An inlet model designed for high angle of attack capability, coupled to a .508 m tip diameter turbof...
An innovative inlet total-pressure distortion measurement rake has been designed and developed for t...
The effects of high-angle-of-attack flight on aircraft inlet aerodynamic characteristics were invest...
The F404-GE-400 engine powered F/A-18A High Alpha Research Vehicle (HARV) was used to examine the ch...
The F404-GE-400-powered F/A-18A High Alpha Research Vehicle (HARV) was used to examine the quality o...
Military aircraft are often subjected to severe flight manoeuvres with high Angles of Attack (AOA) a...
The P404-GF-400 Powered F/A-18A High Alpha Research Vehicle (HARV) was used to examine the impact of...
Flow distortions were measured at the inlet face and diffuser exit of three axisymmetric inlets oper...
NASA Lewis is currently engaged in a research effort as a team member of the High Alpha Technology P...
Concepts are investigated for obtaining both low cowl drag and good inlet performance at high angles...
Turbofan engine used for evaluating air jets as steady state inlet flow distortion devic
Measuring distortion characteristics at engine face station of axisymmetric inle
Flight tests were conducted with two F-111A airplanes to study the effects of steady-state and dynam...
The nature of flow-distortion development in the subsonic diffuser was determined for a typical full...
A wind tunnel investigation was conducted to determine the amplitude and spatial distribution of ste...
An inlet model designed for high angle of attack capability, coupled to a .508 m tip diameter turbof...
An innovative inlet total-pressure distortion measurement rake has been designed and developed for t...
The effects of high-angle-of-attack flight on aircraft inlet aerodynamic characteristics were invest...
The F404-GE-400 engine powered F/A-18A High Alpha Research Vehicle (HARV) was used to examine the ch...
The F404-GE-400-powered F/A-18A High Alpha Research Vehicle (HARV) was used to examine the quality o...
Military aircraft are often subjected to severe flight manoeuvres with high Angles of Attack (AOA) a...
The P404-GF-400 Powered F/A-18A High Alpha Research Vehicle (HARV) was used to examine the impact of...
Flow distortions were measured at the inlet face and diffuser exit of three axisymmetric inlets oper...
NASA Lewis is currently engaged in a research effort as a team member of the High Alpha Technology P...
Concepts are investigated for obtaining both low cowl drag and good inlet performance at high angles...
Turbofan engine used for evaluating air jets as steady state inlet flow distortion devic
Measuring distortion characteristics at engine face station of axisymmetric inle
Flight tests were conducted with two F-111A airplanes to study the effects of steady-state and dynam...
The nature of flow-distortion development in the subsonic diffuser was determined for a typical full...
A wind tunnel investigation was conducted to determine the amplitude and spatial distribution of ste...
An inlet model designed for high angle of attack capability, coupled to a .508 m tip diameter turbof...
An innovative inlet total-pressure distortion measurement rake has been designed and developed for t...