The effect of rest periods on the fatigue life of high-purity aluminum was investigated under two conditions. In one the specimens were tested at elevated temperatures and the rest periods were given at room temperature; in the second the specimens were tested at room temperature and the rest periods were given at elevated temperature. The results obtained indicated that the increase of life was negligible in the first condition, but an increase of life may be obtained in the second. In order to check this increase in fatigue life a second series of tests has been carried out on a different lot of specimens and again an increase in life was found. This increase of life appeared to be from 30 to 60 percent from the average of the results of ...
Fatigue mechanical behavior of wrought aluminum alloy (Al-Mg-Si) 6156 at T4 temper is experimentally...
The major technology areas needed to perform a life prediction of an aircraft turbine engine hot sec...
The laboratory experiments were made on the two aluminium alloyed qualities used for aeronautical in...
Recovery of internal friction during periods of rest in specimens subjected to fatigue stresses in ...
Recovery of internal friction during periods of rest in specimens subjected to fatigue stresses in ...
This paper presents an experimental study of the effect of intermittent rest periods on the fatigue ...
The present project deals with study of fatigue life of Aluminium alloy treated at two different te...
A review is made of the principal concepts of high temperature fatigue behavior of metals as obtaine...
Aluminum alloys were widely used in the construction, automotive, marine, and aviation industries du...
Strain-controlled fatigue tests were performed on 6061-T6 and 7075-T651 aluminum alloys as well as a...
Results are presented of an investigation made to determine the internal friction and fatigue streng...
To understand the influence temperature on the rate of fatigue crack growth in high strength metal a...
Strain-cycling fatigue behavior of 10 different structural alloys and metals was investigated in liq...
In the manufacture of aluminium composites, reinforcement in the form of coal base ash, which has ...
The effects of corrosive media on rotating bending fatigue lives (the cyclic numbers from 104 to 108...
Fatigue mechanical behavior of wrought aluminum alloy (Al-Mg-Si) 6156 at T4 temper is experimentally...
The major technology areas needed to perform a life prediction of an aircraft turbine engine hot sec...
The laboratory experiments were made on the two aluminium alloyed qualities used for aeronautical in...
Recovery of internal friction during periods of rest in specimens subjected to fatigue stresses in ...
Recovery of internal friction during periods of rest in specimens subjected to fatigue stresses in ...
This paper presents an experimental study of the effect of intermittent rest periods on the fatigue ...
The present project deals with study of fatigue life of Aluminium alloy treated at two different te...
A review is made of the principal concepts of high temperature fatigue behavior of metals as obtaine...
Aluminum alloys were widely used in the construction, automotive, marine, and aviation industries du...
Strain-controlled fatigue tests were performed on 6061-T6 and 7075-T651 aluminum alloys as well as a...
Results are presented of an investigation made to determine the internal friction and fatigue streng...
To understand the influence temperature on the rate of fatigue crack growth in high strength metal a...
Strain-cycling fatigue behavior of 10 different structural alloys and metals was investigated in liq...
In the manufacture of aluminium composites, reinforcement in the form of coal base ash, which has ...
The effects of corrosive media on rotating bending fatigue lives (the cyclic numbers from 104 to 108...
Fatigue mechanical behavior of wrought aluminum alloy (Al-Mg-Si) 6156 at T4 temper is experimentally...
The major technology areas needed to perform a life prediction of an aircraft turbine engine hot sec...
The laboratory experiments were made on the two aluminium alloyed qualities used for aeronautical in...