Friction and wear coefficient represent two important variables for hard coating selection in critical engineering applications such as cutting and material forming. To explain fully these variables, is necessary to understand different types of wear mechanisms that occur in coated surfaces. Zirconium nitride (ZrN), chromium nitride (CrN) and titanium aluminum nitride (TiAlN) coatings produced by reactive magnetron sputtering technique were evaluated. The tribological properties- coefficient of friction (COF) and wear coefficient were investigated using a ball on disc tribometer and profilometry. Bias polarization voltage showed an increase in plastic deformation and third body generation failures in the ZrN surface. Nitrogen flux increasin...
CrN coatings produced by magnetron sputtering are routinely deposited on tools and components for ma...
The objective in this investigation was to design and commission a magnetron sputter deposition syst...
The structure, hardness, friction and wear of tungsten nitrides prepared by d.c. reactive magnetron ...
Different works have demonstrated that tantalum, zirconium, and their nitrides present good biocompa...
This work aims to study the effect of the counterpart materials (100Cr6, Al2O3 and WC-Co) on the tri...
Different works have demonstrated that tantalum, zirconium, and their nitrides present good biocompa...
This research focusses on tribological analysis of Titanium Aluminum Nitride (TiAlN) coatings deposi...
The structure, hardness, friction and wear of tungsten nitrides prepared by d.c. reactive magnetron ...
El coeficiente de fricción y el coeficiente de desgaste, representan dos variables importantes para ...
To improve the tribological performance of CrN coating, VN was introduced to form the CrN/VN multila...
Though the tribological properties of PVD TiN coatings have been extensively documented and are fair...
CrN and CrAgN thin films were magnetron sputtered onto the substrate made from Vanadis 6 cold work t...
CrN/CrAlN thin films were deposited by DC reactive magnetron sputtering. The influence of CrN/CrAlN ...
A comparative study was conducted to evaluate the performances against wear and corrosion of CrN, Cr...
A comparative study was conducted to evaluate the performances against wear and corrosion of CrN, Cr...
CrN coatings produced by magnetron sputtering are routinely deposited on tools and components for ma...
The objective in this investigation was to design and commission a magnetron sputter deposition syst...
The structure, hardness, friction and wear of tungsten nitrides prepared by d.c. reactive magnetron ...
Different works have demonstrated that tantalum, zirconium, and their nitrides present good biocompa...
This work aims to study the effect of the counterpart materials (100Cr6, Al2O3 and WC-Co) on the tri...
Different works have demonstrated that tantalum, zirconium, and their nitrides present good biocompa...
This research focusses on tribological analysis of Titanium Aluminum Nitride (TiAlN) coatings deposi...
The structure, hardness, friction and wear of tungsten nitrides prepared by d.c. reactive magnetron ...
El coeficiente de fricción y el coeficiente de desgaste, representan dos variables importantes para ...
To improve the tribological performance of CrN coating, VN was introduced to form the CrN/VN multila...
Though the tribological properties of PVD TiN coatings have been extensively documented and are fair...
CrN and CrAgN thin films were magnetron sputtered onto the substrate made from Vanadis 6 cold work t...
CrN/CrAlN thin films were deposited by DC reactive magnetron sputtering. The influence of CrN/CrAlN ...
A comparative study was conducted to evaluate the performances against wear and corrosion of CrN, Cr...
A comparative study was conducted to evaluate the performances against wear and corrosion of CrN, Cr...
CrN coatings produced by magnetron sputtering are routinely deposited on tools and components for ma...
The objective in this investigation was to design and commission a magnetron sputter deposition syst...
The structure, hardness, friction and wear of tungsten nitrides prepared by d.c. reactive magnetron ...