The anticorrosion performance of an Epoxy-Mastic organic coating was evaluated during continuous immersion in saline solution using electrochemical impedance spectroscopy (EIS). The typical parameters of pore resistance and charge transfer resistance were determined employing an equivalent electric circuit. Constant phase elements (CPE) were used in order to determine fraction of water absorbed, mass diffusion, solubility and the swelling coefficients, as well as to predict the failure times of the coating. The results found by EIS measurements match very well with the high resistance to deterioration exhibited by the coating. It was also found that the excellent protection performance of the coating was mainly due to low water solubility a...
Although EIS is widely applied as a technique for monitoring the degradation of polymeric coatings w...
A critical (steady state) value of the conductivity of different coatings was determined by a combin...
The proposition that corrosion rate is limited by the ionic resistance of an organic coating has bee...
Organic coatings are generally used for metal protection. The coating process involves several steps...
Electrochemical impedance spectroscopy (EIS) was used to study the corrosion behavior of different t...
In this paper the use of Electrochemical Impedance Spectroscopy is evaluated for three situations du...
The use of Electrochemical Impedance Spectroscopy (EIS) in coatings research is widespread. The info...
The film formation process in waterborne (WB) epoxy coatings is studied using electrochemical impeda...
Electrochemical impedance spectroscopy (EIS) has been used to study the solute uptake for epoxy/phen...
International audienceIn the present work, a commercial high solids epoxy-based paint used for the c...
The protective properties of eight high performance commercial multilayer organic coatings for aeron...
The disbondment of protective organic coatings under excessive cathodic protection potentials is a w...
Electrochemical impedance spectroscopy (EIS) was used to evaluate the degree of delamination of the ...
Although EIS is widely applied as a technique for monitoring the degradation of polymeric coatings w...
Although EIS is widely applied as a technique for monitoring the degradation of polymeric coatings w...
Although EIS is widely applied as a technique for monitoring the degradation of polymeric coatings w...
A critical (steady state) value of the conductivity of different coatings was determined by a combin...
The proposition that corrosion rate is limited by the ionic resistance of an organic coating has bee...
Organic coatings are generally used for metal protection. The coating process involves several steps...
Electrochemical impedance spectroscopy (EIS) was used to study the corrosion behavior of different t...
In this paper the use of Electrochemical Impedance Spectroscopy is evaluated for three situations du...
The use of Electrochemical Impedance Spectroscopy (EIS) in coatings research is widespread. The info...
The film formation process in waterborne (WB) epoxy coatings is studied using electrochemical impeda...
Electrochemical impedance spectroscopy (EIS) has been used to study the solute uptake for epoxy/phen...
International audienceIn the present work, a commercial high solids epoxy-based paint used for the c...
The protective properties of eight high performance commercial multilayer organic coatings for aeron...
The disbondment of protective organic coatings under excessive cathodic protection potentials is a w...
Electrochemical impedance spectroscopy (EIS) was used to evaluate the degree of delamination of the ...
Although EIS is widely applied as a technique for monitoring the degradation of polymeric coatings w...
Although EIS is widely applied as a technique for monitoring the degradation of polymeric coatings w...
Although EIS is widely applied as a technique for monitoring the degradation of polymeric coatings w...
A critical (steady state) value of the conductivity of different coatings was determined by a combin...
The proposition that corrosion rate is limited by the ionic resistance of an organic coating has bee...