Analysis of Combustion Systems

As part of the NASA High-Speed Research Program, low emission combustors are being studied and demonstrated. One combustor concept that is currently being studied and evaluated is the Rich burn-Quick mix-Lean burn (RQL) combustor. The quick-mix zone of the RQL combustor is extremely important in reducing NO(x) emissions; rapid mixing of the bypass airflow with rich-born effluent is essential. The basic challenge can be described as rapid jet-in-crossflow mixing. Although jet-in-crossflow mixing is not new, this RQL application is unique in that the jet-to-mainstream mass-flow ratios are higher than studied previously (approx. 3 in RQL applications versus approx. 0.5 in dilution zone studies), plus the emphasis is on reducing NO(x) emissions (i.e. good mixing might not necessarily produce low emissions). This five-years project focused on identifying quick-mix method that would reduce NO(x) emissions in RQL combustor. The work included study of mixing concepts, and the development of design methodology. Three dimension CFD analysis was the primary tool used in assessing concept and developing design methodology for low emission. Isothermal and reacting CFD calculations were performed on cylindrical, rectangular, and annular generic geometries. Systematic parameters studies were performed to isolate key design parameters and their influence on mixing and emissions