Selection of best drilling, completion and stimulation method for coalbed methane reservoirs

Over the past three decades, coalbed methane (CBM) has moved from a mining hazard and novel unconventional resource to an important fossil fuel that accounts for approximately 10% of the U.S. natural gas production and reserves. The expansion of this industry required development of different drilling, completion and stimulation practices for CBM in specific North American basins, owing to the complex combinations of geologic settings and reservoir parameters encountered. These challenges led to many technology advances and to development of CBM drilling, completion and stimulation technology for specific geologic settings. The objectives of this study were to (1) determine which geologic parameters affect CBM drilling, completion and stimulation decisions, (2) identify to the engineering best practices for specific geologic settings, and (3) present these findings in decision charts or advisory systems that could be applied by industry professionals. To determine best drilling, completion and stimulation practices for CBM reservoirs, I reviewed literature and solicited opinions of industry experts through responses to a questionnaire. I identified thirteen geologic parameters (and their ranges of values) that are assessed when selecting CBM drilling, completion and stimulating applications. These are coal thickness, number of seams, areal extent, dip, depth, rank, gas content, formation pressure, permeability, water saturation, and compressive strength, as well as the vertical distribution of coal beds and distance from coal reservoirs to fracture barriers or aquifers. Next, I identified the optimum CBM drilling, completion and stimulating practices for specific combinations of these geologic parameters. The engineering best practices identified in this project may be applied to new or existing fields, to optimize gas reserves and project economics. I identified the best engineering practices for the different CBM basins in N.A and combined these results in the form of two decision charts that engineers may use to select best drilling and completion practices, as well as the optimal stimulation methods and fluids for specific geologic settings. The decision charts are presented in a Visual Basic Application software program to facilitate their use by engineers