Use of a surface-mounted chirped fibre Bragg grating sensor to monitor delamination growth in a double-cantilever beam test

A surface-mounted chirped fibre Bragg grating (CFBG) sensor has been used for the first time to monitor delamination growth within a composite material (a transparent, unidirectionally reinforced glass fibre/epoxy resin double-cantilever beam (DCB) specimen). The specimens were tested using a constant displacement rate, with the delamination length being measured using complementary techniques: (i) in situ photography, (ii) surface-mounted strain gauges, and (iii) the surface-mounted CFBG sensors. The unidirectionally reinforced DCB specimens showed characteristics typical of such material which complicate the curvature of the beams, i.e. the development of extensive fibre bridging and pronounced R-curve behaviour. To validate the interpretation of the CFBG reflected spectrum, the experimentally determined strains from the surface-mounted strain gauges have been used, together with in situ photographs of the position of the delamination front. Using the CFBG sensor technique, the delamination length was measured to within about 4 mm over the 60 mm sensor length