Optimum bit-by-bit power allocation for minimum distortion transmission

In this thesis, bit-by-bit power allocation in order to minimize mean-squared error (MSE) distortion of a basic communication system is studied. This communication system consists of a quantizer. There may or may not be a channel encoder and a Binary Phase Shift Keying (BPSK) modulator. In the quantizer, natural binary mapping is made. First, the case where there is no channel coding is considered. In the uncoded case, hard decision decoding is done at the receiver. It is seen that errors that occur in the more significant information bits contribute more to the distortion than less significant bits. For the uncoded case, the optimum power profile for each bit is determined analytically and through computer-based optimization methods like differential evolution. For low signal-to-noise ratio (SNR), the less significant bits are allocated negligible power compared to the more significant bits. For high SNRs, it is seen that the optimum bit-by-bit power allocation gives constant MSE gain in dB over the uniform power allocation. Second, the coded case is considered. Linear block codes like (3,2), (4,3) and (5,4) single parity check codes and (7,4) Hamming codes are used and soft-decision decoding is done at the receiver. Approximate expressions for the MSE are considered in order to find a near-optimum power profile for the coded case. The optimization is done through a computer-based optimization method (differential evolution). For a simple code like (7,4) Hamming code simulations show that up to 3 dB MSE gain can be obtained by changing the power allocation on the information and parity bits. A systematic method to find the power profile for linear block codes is also introduced given the knowledge of input-output weight enumerating function of the code. The information bits have the same power, and parity bits have the same power, and the two power levels can be different