Moisture content on some engineering properties of celery (Apium Graveolens L) seeds

The study was conducted to investigate some physical properties of celery seed at various moisture levels. The average length, width, thickness and 1000-seeds mass were 0.571, 0.429, 0.295 mm and 0.792 g, respectively, at moisture content of 5.24% (d.b). Length, width and thickness distributions of the seeds were modeled using Generalized Extreme Value, lognormal and Weibull distributions. Results showed that to model length of the seeds, lognormal distribution had the best performance while to model the width of the seeds Weibull distribution had the best performance. True density has increase from 892.02 to 931.42 kg/m3 when the moisture content increased from 5.24% to 20.25% (d.b). The angle of static friction increased from 28.45 to 39.66°, 25.15 to 34.84°, 19.57 to 27.07° and 16.72 to 19.720° for plywood, rubber, iron and galvanized metal, respectively, as the moisture content increases from 5.24% to 20.25% (d.b). The pouring angle of repose increased from 34.70 to 39.12°, 33.37 to 36.37°, 30.59 to 33.33° and 27.16 to 29.45° for plywood, rubber, iron and galvanized metal , respectively, as the moisture content increases from 5.24% to 20.25% (d.b). The Hele-Shaw angle of repose increased from 32.65 to 35.25°, 30.35 to 32.77°, 27.81 to 30.03° and 24.72 to 26.61° for plywood, rubber, iron and galvanized metal , respectively, as the moisture content increases from 5.24% to 20.25% (d.b)