Effect of Fibre Type on Mechanical Properties of Nonwoven Reinforced TPU Composites

Nonwoven-reinforced composites were produced using both low modulus fibres (lyocell, polyethylene terephthalate, and polyamide) and high modulus aramid fibres (polyphenylene terephthalamide) in thermoplastic polyurethane (TPU) matrix. Preferentially oriented web preforms were prepared by carding and pre-needling before impregnating the nonwovens in a thermoplastic polyurethane resin matrix. Composites were prepared by compression moulding and mechanical properties were evaluated. Scanning Electron Microscopy was employed to study the fibre-to-matrix interface in the nonwoven-reinforced composites. It was found that nonwoven reinforcement provided a range of mechanical properties, mainly linked to fibre properties and orientation of fibres in the web, apparently unaffected by the mechanical properties of the web. Furthermore, all studies fibres were thoroughly embedded in the matrix