The effect of phosphorous on the integrity of the thermally grown aluminium oxide layer formed on a platinum-aluminide coated a single-crystal nickel-base superalloy (CMSX-4) was studied through oxidation tests for varying exposure times followed by analysis using scanning electron microscopy and microanalysis. The samples were oxidized for up to 72 hours in pure oxygen (0.2 atm) at 1150°C. Oxide spallation was shown on the surface even after short exposure (24 hour). The fraction of the spallation increased with time. Analysis revealed that phosphorous was associated with spalled areas in all conditions and is proposed to contribute to the failure by weakening to oxide/coating interface. A strong correlation was observed between phosphorou...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...
Microstructures and residual stress of long-term oxidized nickel aluminide coating on superalloy wer...
Microstructures and residual stress of long-term oxidized nickel aluminide coating on superalloy wer...
A platinum-free (MDC210) and a platinum-rich (MDC150L) aluminide diffusion coating applied to a CMSX...
The effects of platinum modification on the isothermal oxidation performance of a chemical vapour de...
This thesis reports on investigations of high temperature oxidation resistant aluminide diffusion co...
Twenty disk-shaped aluminized (β-NiAl) CMSX-4 single crystal superalloy specimens were oxidized in a...
Twenty disk-shaped aluminized ( beta-NiAl) CMSX-4 single crystal superalloy specimens were oxidized ...
CMSX-4 is a single-crystalline Ni-base superalloy designed to be used at very high temperatures and ...
Single-crystal nickel-base superalloys are extensively used for turbine blades with thermal barrier ...
Rhodium-modified as well as palladium-modified and non-modified aluminide coatings on CMSX-4 Ni-base...
Thermally grown oxide (TOO) scale on aluminized CMSX-4 single crystal superalloy has been examined a...
High temperature oxidation and corrosion of Ni-based superalloys used for blades in industrial gas t...
A large test sample of single-crystal superalloy (CMSX-4) deposited with a MCrAlY coating of γ and β...
A thermally grown oxide (TGO) such as the alumina scale formed on a bondcoat enhances the oxidation ...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...
Microstructures and residual stress of long-term oxidized nickel aluminide coating on superalloy wer...
Microstructures and residual stress of long-term oxidized nickel aluminide coating on superalloy wer...
A platinum-free (MDC210) and a platinum-rich (MDC150L) aluminide diffusion coating applied to a CMSX...
The effects of platinum modification on the isothermal oxidation performance of a chemical vapour de...
This thesis reports on investigations of high temperature oxidation resistant aluminide diffusion co...
Twenty disk-shaped aluminized (β-NiAl) CMSX-4 single crystal superalloy specimens were oxidized in a...
Twenty disk-shaped aluminized ( beta-NiAl) CMSX-4 single crystal superalloy specimens were oxidized ...
CMSX-4 is a single-crystalline Ni-base superalloy designed to be used at very high temperatures and ...
Single-crystal nickel-base superalloys are extensively used for turbine blades with thermal barrier ...
Rhodium-modified as well as palladium-modified and non-modified aluminide coatings on CMSX-4 Ni-base...
Thermally grown oxide (TOO) scale on aluminized CMSX-4 single crystal superalloy has been examined a...
High temperature oxidation and corrosion of Ni-based superalloys used for blades in industrial gas t...
A large test sample of single-crystal superalloy (CMSX-4) deposited with a MCrAlY coating of γ and β...
A thermally grown oxide (TGO) such as the alumina scale formed on a bondcoat enhances the oxidation ...
Oxidation behavior of the uncoated base, Ni–Al coated and Re–Cr-Ni plus Ni–Al coated single-crystal ...
Microstructures and residual stress of long-term oxidized nickel aluminide coating on superalloy wer...
Microstructures and residual stress of long-term oxidized nickel aluminide coating on superalloy wer...