Computer modelling of the dynamic response of viscoelastic vibroisolators

The paper investigates ways to model the response of vibro-isolation mounts that utilise viscoelastic materials. Simple models based on linear and nonlinear static stiffness are developed. Dynamic response is approximated through appropriate scaling of the viscoelastic Young’s modulus and use of the measured material loss factor. The approach is validated using cylindrical mounts made of polyurethane. The response of a 68 kg mass supported by two mounts and subjected to two different high-amplitude shock loads is predicted. Measured and predicted behaviour correlate closely of the nonlinear model while the linear model gives a reasonable representation. It is noted that the sensitivity of such mounts to temperature is high: the change in response associated with a temperature excursion of 10 C is significantly greater than the inaccuracy involved with using the linear model