The high cost of Pt-based cathode, and its possibility of being poisoned by the presence of buffer in the electrolyte are two paramount issues in the BES system. The Ni-Fe has become one of the good alternatives because it has excellent catalytic properties, inexpensive, commercially available and low toxicity to microorganisms. In this study, Ni-Fe foam applied as a cathode in dual-chamber BES, while effluent of glucose fermentation as a substrate in the anode side. The characteristic of Ni-Fe surface was analyzed by using field emission scanning electron microscopy. Whereas, the catalytic property of Ni-Fe was evaluated by using linear sweep voltammetry test. The maximum hydrogen production rate and yield obtained were 500 ± 80 m3/m3/d a...
Zero Emission Fuels B.V. (ZEF) is developing an integrated micro-plant to produce methanol from capt...
Aqueous electrolyte formulations for NiFe cells were prepared by using lithium hydroxide and potassi...
AbstractIron electrodes were prepared by hot-pressing iron-polyethylene based formulations on nickel...
The high cost of Pt-based cathode, and its possibility of being poisoned by the presence of buffer i...
The low cost, low over-potential loss, good catalytic properties for hydrogen evolution reaction (HE...
The cost of a cathode and/or catalyst in a microbial electrolysis cell (MEC) is one of the main fact...
NiFe batteries are emerging as an important energy storage technology but suffer from a hydrogen-pro...
The low cost, low over-potential loss, good catalytic properties for hydrogen evolution reaction (HE...
In this article we use a surface response approach to investigate the effect of iron sulphide as wel...
In this article, we use a surface response approach to investigate the effect of bismuth sulphide as...
AbstractIn this article, we use a surface response approach to investigate the effect of bismuth sul...
Multiple regression analysis was used to investigate the effect of bismuth sulphide and iron sulphid...
The transition to renewable electricity sources and green feedstock implies the development of elect...
Aiming to develop a cost effective means to store large amounts of electric energy, NiFe batteries w...
Green hydrogen is a real alternative to change the current energy system. Electrochemical water spli...
Zero Emission Fuels B.V. (ZEF) is developing an integrated micro-plant to produce methanol from capt...
Aqueous electrolyte formulations for NiFe cells were prepared by using lithium hydroxide and potassi...
AbstractIron electrodes were prepared by hot-pressing iron-polyethylene based formulations on nickel...
The high cost of Pt-based cathode, and its possibility of being poisoned by the presence of buffer i...
The low cost, low over-potential loss, good catalytic properties for hydrogen evolution reaction (HE...
The cost of a cathode and/or catalyst in a microbial electrolysis cell (MEC) is one of the main fact...
NiFe batteries are emerging as an important energy storage technology but suffer from a hydrogen-pro...
The low cost, low over-potential loss, good catalytic properties for hydrogen evolution reaction (HE...
In this article we use a surface response approach to investigate the effect of iron sulphide as wel...
In this article, we use a surface response approach to investigate the effect of bismuth sulphide as...
AbstractIn this article, we use a surface response approach to investigate the effect of bismuth sul...
Multiple regression analysis was used to investigate the effect of bismuth sulphide and iron sulphid...
The transition to renewable electricity sources and green feedstock implies the development of elect...
Aiming to develop a cost effective means to store large amounts of electric energy, NiFe batteries w...
Green hydrogen is a real alternative to change the current energy system. Electrochemical water spli...
Zero Emission Fuels B.V. (ZEF) is developing an integrated micro-plant to produce methanol from capt...
Aqueous electrolyte formulations for NiFe cells were prepared by using lithium hydroxide and potassi...
AbstractIron electrodes were prepared by hot-pressing iron-polyethylene based formulations on nickel...