Add to ORKGThis is an inexpensive route for the production of open celled foams. It allows a high degree of control over cell size and shape, and results in relatively uniform morphology. The interconnectivity of pores can be controlled by varying the degree of sintering of the precursor
Preforms made from porous salt beads with different diameters (0.5–1.0, 1.4–2.0 and 2.5–3.1 mm) have...
AbstractThis work reports the fabricating of open–cell Al foams which were manufactured through infi...
This work reports the processing of aluminum (Al) foams with pore size in the range from 1 to 2 mm a...
This is an inexpensive route for the production of open celled foams. It allows a high degree of con...
FOAM-U-LIKE (Foaming of aluminium metal using lightly interconnected kevelled elements) is a very in...
Although the processing route is complicated and the product expensive, there is a high degree of co...
Metal foams may have applications in the field of catalytic supports, but the available manufacturin...
This project sought to design, implement and evaluate a process for the manufacture of porous, spher...
artin ed f e 3 In replication processing of open-pore aluminium foams, the relative density can be v...
In the current study, a first attempt at using aluminum flakes for the manufacture of open-cell alum...
International audienceThe mechanical property of open-cell aluminum foam directly depends on the foa...
This thesis explores the processing and properties of microcellular aluminium-based materials produc...
A typical aluminum alloy for casting (AlSi7Mg0.3) was used to produce open-cell foams by replication...
This paper discusses the improvement made by pressure assisted sintering dissolution process (PASDP)...
This work studies the effect of some production parameters on the pore connectivity grade i.e., th...
Preforms made from porous salt beads with different diameters (0.5–1.0, 1.4–2.0 and 2.5–3.1 mm) have...
AbstractThis work reports the fabricating of open–cell Al foams which were manufactured through infi...
This work reports the processing of aluminum (Al) foams with pore size in the range from 1 to 2 mm a...
This is an inexpensive route for the production of open celled foams. It allows a high degree of con...
FOAM-U-LIKE (Foaming of aluminium metal using lightly interconnected kevelled elements) is a very in...
Although the processing route is complicated and the product expensive, there is a high degree of co...
Metal foams may have applications in the field of catalytic supports, but the available manufacturin...
This project sought to design, implement and evaluate a process for the manufacture of porous, spher...
artin ed f e 3 In replication processing of open-pore aluminium foams, the relative density can be v...
In the current study, a first attempt at using aluminum flakes for the manufacture of open-cell alum...
International audienceThe mechanical property of open-cell aluminum foam directly depends on the foa...
This thesis explores the processing and properties of microcellular aluminium-based materials produc...
A typical aluminum alloy for casting (AlSi7Mg0.3) was used to produce open-cell foams by replication...
This paper discusses the improvement made by pressure assisted sintering dissolution process (PASDP)...
This work studies the effect of some production parameters on the pore connectivity grade i.e., th...
Preforms made from porous salt beads with different diameters (0.5–1.0, 1.4–2.0 and 2.5–3.1 mm) have...
AbstractThis work reports the fabricating of open–cell Al foams which were manufactured through infi...
This work reports the processing of aluminum (Al) foams with pore size in the range from 1 to 2 mm a...