Uniform polycrysalline p-type CuInSe$ sb2$ films, thicknesses ranging from 1 to 4 $ mu$m, were deposited by a stable electrodeposition process developed in our laboratory. A (112) preferred orientation was found for the films. Vacuum annealing experiment results showed an improvement in the crystalline quality of the films after the annealing. The metal ratio of the films was not altered significantly by the annealing process. Al/CuInSe$ sb2$ Schottky junctions fabricated on p-type CuInSe$ sb2$ films showed that the current transport mechanism in the intermediate voltage region was governed by a recombination component. A dispersion effect of the capacitance-voltage curves with frequency, observed on the Schottky junctions suggested the pre...
Films of CuInSe2 were deposited onto glass substrates by a hot wall deposition method using bulk CuI...
Schottky junctions were fabricated by evaporating Al on Bridgman-grown monocrystalline p-type CuInSe...
Using a vertical Bridgman method, ingots of the chalcopyrite semiconductor CuInSe2 were prepared con...
International audienceBifacial solar cells combining a heterojunction cell on the upper side and cry...
Photovoltaic cells with a ZnO/CdS/CuInSe$ sb2$ structure have been fabricated on bulk CuInSe$ sb2$ s...
We have investigated thin films and junctions based on copper indium diselenide (CIS) which have bee...
Copper indium diselenide (CuInSe2) films have been prepared by pulse electrodeposition technique on ...
In order to develop low-cost, large area multi-layer graded bandgap solar cell structures, CuInSe2 l...
Copper indium diselenide (CuInSe2) films have been prepared by pulse electrodeposition technique on ...
Chalcopyrite Cu(In,Al)Se-2 (CIAS) thin films are grown on stainless steel substrate through one-step...
The results presented here impact the CuInSe$\sb2$ solar cells community in three areas: (1) fundame...
[EN] In this study CuInSe2 and CuInS2 thin films were prepared onto ITO glass substrate using the el...
Copper indium diselenide (CuInSe2) layers have been grown at room temperature by electrochemical dep...
The work reported in this thesis includes the growth and characterisation of CuInSe[2]-based materia...
Films of $CuInSe_2$ were deposited onto glass substrates by a hot wall deposition method under therm...
Films of CuInSe2 were deposited onto glass substrates by a hot wall deposition method using bulk CuI...
Schottky junctions were fabricated by evaporating Al on Bridgman-grown monocrystalline p-type CuInSe...
Using a vertical Bridgman method, ingots of the chalcopyrite semiconductor CuInSe2 were prepared con...
International audienceBifacial solar cells combining a heterojunction cell on the upper side and cry...
Photovoltaic cells with a ZnO/CdS/CuInSe$ sb2$ structure have been fabricated on bulk CuInSe$ sb2$ s...
We have investigated thin films and junctions based on copper indium diselenide (CIS) which have bee...
Copper indium diselenide (CuInSe2) films have been prepared by pulse electrodeposition technique on ...
In order to develop low-cost, large area multi-layer graded bandgap solar cell structures, CuInSe2 l...
Copper indium diselenide (CuInSe2) films have been prepared by pulse electrodeposition technique on ...
Chalcopyrite Cu(In,Al)Se-2 (CIAS) thin films are grown on stainless steel substrate through one-step...
The results presented here impact the CuInSe$\sb2$ solar cells community in three areas: (1) fundame...
[EN] In this study CuInSe2 and CuInS2 thin films were prepared onto ITO glass substrate using the el...
Copper indium diselenide (CuInSe2) layers have been grown at room temperature by electrochemical dep...
The work reported in this thesis includes the growth and characterisation of CuInSe[2]-based materia...
Films of $CuInSe_2$ were deposited onto glass substrates by a hot wall deposition method under therm...
Films of CuInSe2 were deposited onto glass substrates by a hot wall deposition method using bulk CuI...
Schottky junctions were fabricated by evaporating Al on Bridgman-grown monocrystalline p-type CuInSe...
Using a vertical Bridgman method, ingots of the chalcopyrite semiconductor CuInSe2 were prepared con...