Förluster i lindningar av högvarviga PM maskiner med växelriktare

This master thesis focuses on the estimation of losses in windings of a high-speed PermanentMagnet (PM) motor. The PM motor studied in this thesis is applied to a nut-runner systemwith specic characteristics such as operating at a high speed (30000 rpm), relatively smallsize and being slot-less. Previously published analytical models for calculation the losses inwindings are discussed in the literature study along with related background theory. Finiteelement method (FEM) 2D is applied in the simulations using FLUX v12. Simulations beginwith several conductors and bundles. Meanwhile, the analytical estimation of those caseswas carried out. The comparisons between results from both sources are discussed. Beforefurther investigations, the way of connection of bundles and conductors and the applicationof symmetrical conditions for following simulations are discussed. Furthermore, the wholewindings with a iron ring and the rotor are simulated step by step in FLUX. Eect of ironmaterial, lamination thickness and base value are investigated. Finally, losses in windingswith various situations are calculated and compared at 10 kHz and 20 kHz.Detta examensarbete behandlar uppskattning av forluster i lindningarna hos en permanentmagnet(PM) hoghastighets-motor. PM-motorn som studerats i denna avhandling tillhor ettmutterdragarsystem avsett for industriellt bruk. Utmarkande egenskaper for denna ar hoghastighet (30000 rpm), relativt liten storlek och avsaknad av statorspar. Tidigare publiceradeanalysmodeller for forlustberakningar i lindningar diskuteras i litteraturstudien tillsammansmed tillhorande bakgrundsteori. Finita Element Metoden (FEM) 2D anvands i simuleringarna.FEM-studierna har utforts i FLUX v12. Studierna utfors initialt pa era ledareoch buntar parallellt med analytiska uppskattningar for dessa. Resultaten fran bada kallornajamfors och diskuteras. Vidare diskuteras olika mojligheter till anslutning av era ledare ochledarvarv, samt tillampning av symmetriska villkor for vidare simuleringar. Lindningarnasimuleras darefter stegvis tillsammans med en jarnring och rotor. Paverkan av jarnmaterial,laminat-tjocklek och basvarde utreds. Slutligen utfors forlustjamforelser i lindningarna forolika kongurationer vid 10 kHz och 20 kHz.Buntade, ledare, FEM 2D, forluster, PM motor, yteekt och narhetseekt, vridna, lindningarn