Add to ORKGSubject of investigation: steel with a chromium content of up to 5%. Purpose of the work: study of the influence of the austenization conditions on the structure and physicomechanical properties of hardened chromium steel. The investigation determined delamination of austenite into zones enriched and improverished with chromium and carbon. The high-temperature part of the iron - chromium - carbon content state diagram is made more precise. Outlined are practical lines of optimization of the steel chemical composition and thermal treatment conditions for achieving maximum cold resistance. Steel 15X3 and practical recommendations on the thermal treatment are now in use. The downtime of equipment was reduced by 15%Available from VNTIC / VNTIC ...
This work was carried out in collaboration between all authors. All authors read and approved the fi...
The object of the investigation is high-chromium tool steels of ledeburite class and hypereutectoid ...
Subject of investigation: austenitic steels Cr-Mn-Ni with a nitrogen content of 0,23 to 0,73% of the...
The X153CrMoV12 ledeburitic chromium steel characteristically has high abrasive wear resistance, due...
About twenty specimens containing 15～74 per cent of chromium were examined on the hardness, dilatati...
In this paper we analyzed the effect of chromium, vanadium and titanium on the mechanical properties...
The cause of the so-called 475℃ brittleness of a high chromium steel has not yet been determined. To...
The study is focused on the assessment of the best thermal range for plastic deformation of Cr-Mn au...
Przestawiono wyniki badań stali chromowej NC11LV, stosowanej na narzędzia do obróbki plastycznej na ...
Diagrams of supercooled austenite decomposition are constructed for new steels of the Kh2G2C2MF allo...
The demand for Advanced High Strength Steel (AHSS) in the automotive industry is increasing day by d...
The objective of this study was to determine the requirements for steels used as construction materi...
The heat treatment response and the microstructure of a high-chromium steel alloyed with nitrogen wa...
The thesis deals with the influence of solidification conditions on structure and mechanical propert...
Purpose. The main purpose of the work is to determine the peculiarities of the development of recrys...
This work was carried out in collaboration between all authors. All authors read and approved the fi...
The object of the investigation is high-chromium tool steels of ledeburite class and hypereutectoid ...
Subject of investigation: austenitic steels Cr-Mn-Ni with a nitrogen content of 0,23 to 0,73% of the...
The X153CrMoV12 ledeburitic chromium steel characteristically has high abrasive wear resistance, due...
About twenty specimens containing 15～74 per cent of chromium were examined on the hardness, dilatati...
In this paper we analyzed the effect of chromium, vanadium and titanium on the mechanical properties...
The cause of the so-called 475℃ brittleness of a high chromium steel has not yet been determined. To...
The study is focused on the assessment of the best thermal range for plastic deformation of Cr-Mn au...
Przestawiono wyniki badań stali chromowej NC11LV, stosowanej na narzędzia do obróbki plastycznej na ...
Diagrams of supercooled austenite decomposition are constructed for new steels of the Kh2G2C2MF allo...
The demand for Advanced High Strength Steel (AHSS) in the automotive industry is increasing day by d...
The objective of this study was to determine the requirements for steels used as construction materi...
The heat treatment response and the microstructure of a high-chromium steel alloyed with nitrogen wa...
The thesis deals with the influence of solidification conditions on structure and mechanical propert...
Purpose. The main purpose of the work is to determine the peculiarities of the development of recrys...
This work was carried out in collaboration between all authors. All authors read and approved the fi...
The object of the investigation is high-chromium tool steels of ledeburite class and hypereutectoid ...
Subject of investigation: austenitic steels Cr-Mn-Ni with a nitrogen content of 0,23 to 0,73% of the...