Elastic distortion calculations at IMGC on the PTB 400 MPa pressure balance (free deformation type) as a part of the EUROMET project 256

Elastic Constants Determination and Deformation Observation Using Brazilian Disk Geometry

C. Liu
See Profile
C. Liu
M. L. Lovato

January 2010

All in-text references underlined in blue are linked to publications on ResearchGate, letting you ac...

The Deformation-DIA: A Novel Apparatus for Measuring the Strength of Materials at High Strain to Pressures at Elevated Temperature

Durham, W

March 2004

The primary focus of this 3-year project was to develop and put to use an instrument to test experim...

CCM International comparison in the pressure range from 0,1 MPa to 1 MPa (Gauge model) using a Desgranges Huot (tungsten carbide piston-cylinder) transfer standard (Phase A2). CNR-IMGC pressure comparison results

Molinar, G.F.
Maghenzani, R
Consiglio Nazionale delle Ricerche, Turin (Italy). Istituto di Metrologia "G. Colonnetti"

January 1996

Consiglio Nazionale delle Ricerche (CNR). Biblioteca Centrale / CNR - Consiglio Nazionale delle Rich...

Elastic distortion calculations at IMGC on the LNE 200 MPa pressure balance (free deformation type) as a part of the agreed Euromed project 256

Molinar, G.F.
Cresto, P.C
Consiglio Nazionale delle Ricerche, Turin (Italy). Istituto di Metrologia "G. Colonnetti"

January 1994

Consiglio Nazionale delle Ricerche (CNR). Biblioteca Centrale / CNR - Consiglio Nazionale delle Rich...

Elastic distortion calculations at PTB on a PTB 400 MPa pressure balance as part of EUROMET project 256

Sabuga, E.
Physikalisch-Technische Bundesanstalt, Braunschweig (Germany). Thermodynamik

January 1995

The elastic distortion of piston-cylinder units used for the measurement of pressure leads to a chan...

Parameterschaetzung fuer elastisch-plastische Deformationsgesetze bei Beruecksichtigung lokaler und globaler Vergleichsgroessen

Benedix, U.

January 2000

Available from TIB Hannover: RR 8614(2000,4)+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Te...

Hyperelastizitaet und Elastoplastizitaet unter allgemeiner Deformation

Parisch, H.

January 2002

Available from TIB Hannover: RR 7887(2002,36) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Tec...

Computational and experimental analysis of elastic deformation in impact

Hocknell, A.

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN021099 / BLDSC - British Library D...

Parameteridentifikation elastisch-plastischer Deformationsgesetze durch Anpassung numerischer an experimentell ermittelte Verschiebungsfelder

Kretzschmar, S.

January 1998

Available from TIB Hannover: RR 8614(98-3) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Techni...

On deformations of compressible hyperelastic materials

Jiang, X.

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN022674 / BLDSC - British Library D...

Deformation plastique de monocristaux de structure cubique centree en compression plane

Orlans-Joliet, Bertine
Ecole Nationale Superieure des Mines, 75 - Paris (France)

January 1989

CNRS T Bordereau / INIST-CNRS - Institut de l'Information Scientifique et TechniqueSIGLEFRFranc

A FEM ANALYSIS OF A NEGATIVE FREE DEFORMATION PRESSURE BALANCE OPERATING UP TO 100 MPa

G. Buonanno
G. Giovinco
G. Molinar
Min Beciet
P. Delajoud
R. Haines

January 2006

(Author for contacts) Abstract: The main purpose of this work is the numerical and experimental anal...

Modellierung grosser Deformationen in orthotropen, hyperelastischen Schalenstrukturen

Luerding, D.
Bochum Univ. (Germany). Inst. fuer Mechanik

January 2001

Available from TIB Hannover: RN 4503(125) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technis...

Development of wide-range constitutive equations for calculations of high-rate deformation of metals

V.A. Raevsky
O.N. Aprelkov
O.N. Ignatova
V.I. Igonin
A.I. Lebedev
S.S. Nadezhin
M.A. Zocher
D. Preston
A. Coul

January 2011

For development of models of strength and compressibility of metals in wide range of pressures (up t...

High strain rate micro-compression for crystal plasticity constitutive law parameters identification

Breumier, Simon
Sao-Joao, Sergio
Villani, Aurélien
Lévesque, Martin
Kermouche, Guillaume

May 2020

Experimental data and numerical model attached to the article "High strain rate micro-compression fo...

Elastic Constants Determination and Deformation Observation Using Brazilian Disk Geometry

C. Liu
See Profile
C. Liu
M. L. Lovato

January 2010

All in-text references underlined in blue are linked to publications on ResearchGate, letting you ac...

The Deformation-DIA: A Novel Apparatus for Measuring the Strength of Materials at High Strain to Pressures at Elevated Temperature

Durham, W

March 2004

The primary focus of this 3-year project was to develop and put to use an instrument to test experim...

CCM International comparison in the pressure range from 0,1 MPa to 1 MPa (Gauge model) using a Desgranges Huot (tungsten carbide piston-cylinder) transfer standard (Phase A2). CNR-IMGC pressure comparison results

Molinar, G.F.
Maghenzani, R
Consiglio Nazionale delle Ricerche, Turin (Italy). Istituto di Metrologia "G. Colonnetti"

January 1996

Consiglio Nazionale delle Ricerche (CNR). Biblioteca Centrale / CNR - Consiglio Nazionale delle Rich...

Elastic distortion calculations at IMGC on the LNE 200 MPa pressure balance (free deformation type) as a part of the agreed Euromed project 256

Molinar, G.F.
Cresto, P.C
Consiglio Nazionale delle Ricerche, Turin (Italy). Istituto di Metrologia "G. Colonnetti"

January 1994

Consiglio Nazionale delle Ricerche (CNR). Biblioteca Centrale / CNR - Consiglio Nazionale delle Rich...

Elastic distortion calculations at PTB on a PTB 400 MPa pressure balance as part of EUROMET project 256

Sabuga, E.
Physikalisch-Technische Bundesanstalt, Braunschweig (Germany). Thermodynamik

January 1995

The elastic distortion of piston-cylinder units used for the measurement of pressure leads to a chan...

Parameterschaetzung fuer elastisch-plastische Deformationsgesetze bei Beruecksichtigung lokaler und globaler Vergleichsgroessen

Benedix, U.

January 2000

Available from TIB Hannover: RR 8614(2000,4)+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Te...

Hyperelastizitaet und Elastoplastizitaet unter allgemeiner Deformation

Parisch, H.

January 2002

Available from TIB Hannover: RR 7887(2002,36) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Tec...

Computational and experimental analysis of elastic deformation in impact

Hocknell, A.

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN021099 / BLDSC - British Library D...

Parameteridentifikation elastisch-plastischer Deformationsgesetze durch Anpassung numerischer an experimentell ermittelte Verschiebungsfelder

Kretzschmar, S.

January 1998

Available from TIB Hannover: RR 8614(98-3) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Techni...

On deformations of compressible hyperelastic materials

Jiang, X.

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN022674 / BLDSC - British Library D...

Deformation plastique de monocristaux de structure cubique centree en compression plane

Orlans-Joliet, Bertine
Ecole Nationale Superieure des Mines, 75 - Paris (France)

January 1989

CNRS T Bordereau / INIST-CNRS - Institut de l'Information Scientifique et TechniqueSIGLEFRFranc

A FEM ANALYSIS OF A NEGATIVE FREE DEFORMATION PRESSURE BALANCE OPERATING UP TO 100 MPa

G. Buonanno
G. Giovinco
G. Molinar
Min Beciet
P. Delajoud
R. Haines

January 2006

(Author for contacts) Abstract: The main purpose of this work is the numerical and experimental anal...

Modellierung grosser Deformationen in orthotropen, hyperelastischen Schalenstrukturen

Luerding, D.
Bochum Univ. (Germany). Inst. fuer Mechanik

January 2001

Available from TIB Hannover: RN 4503(125) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technis...

Development of wide-range constitutive equations for calculations of high-rate deformation of metals

V.A. Raevsky
O.N. Aprelkov
O.N. Ignatova
V.I. Igonin
A.I. Lebedev
S.S. Nadezhin
M.A. Zocher
D. Preston
A. Coul

January 2011

For development of models of strength and compressibility of metals in wide range of pressures (up t...

High strain rate micro-compression for crystal plasticity constitutive law parameters identification

Breumier, Simon
Sao-Joao, Sergio
Villani, Aurélien
Lévesque, Martin
Kermouche, Guillaume

May 2020

Experimental data and numerical model attached to the article "High strain rate micro-compression fo...

Elastic Constants Determination and Deformation Observation Using Brazilian Disk Geometry

C. Liu
See Profile
C. Liu
M. L. Lovato

January 2010

All in-text references underlined in blue are linked to publications on ResearchGate, letting you ac...

The Deformation-DIA: A Novel Apparatus for Measuring the Strength of Materials at High Strain to Pressures at Elevated Temperature

Durham, W

March 2004

The primary focus of this 3-year project was to develop and put to use an instrument to test experim...

CCM International comparison in the pressure range from 0,1 MPa to 1 MPa (Gauge model) using a Desgranges Huot (tungsten carbide piston-cylinder) transfer standard (Phase A2). CNR-IMGC pressure comparison results

Molinar, G.F.
Maghenzani, R
Consiglio Nazionale delle Ricerche, Turin (Italy). Istituto di Metrologia "G. Colonnetti"

January 1996

Consiglio Nazionale delle Ricerche (CNR). Biblioteca Centrale / CNR - Consiglio Nazionale delle Rich...

Elastic distortion calculations at IMGC on the PTB 400 MPa pressure balance (free deformation type) as a part of the EUROMET project 256

Abstract

Extracted data

Elastic distortion calculations at IMGC on the PTB 400 MPa pressure balance (free deformation type) as a part of the EUROMET project 256

Abstract

Extracted data

Related items

Related items