Etude Theorique et Experimentale du Procede de Fabrication de Films Minces de Polypropylene par Extrusion-Bietirage

The extrusion, performance and characterization of metallocene catalysed polyethylene based packaging films

Beagan, C.M.

January 2000

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036227 / BLDSC - British Library D...

The effect of extrusion processing parameters on the die swell of polypropylene /

Van Puymbrouck, Niels(ugent)01301714
UGent.Faculteit Ingenieurswetenschappen en Architectuur.
Cardon, Ludwig(ugent)802000179080(viaf)305752280promotor
D'hooge, Dagmar(ugent)802000024082(viaf)344148996073759751721copromotor

Master of Science in de industriële wetenschappen: elektromechanica - Campus Schoonmeerse

Extrusion des Polymères

Lafleur, Pierre G.
Vergnes, Bruno

January 2014

National audienceL'extrusion est le plus important des procédés de transformation des polymères. Dan...

Etude de la fabrication de films minces en polypropylene par un procede de bietirage

Haudin, J.M.
Cotto, D.
Fonds de la Recherche et de la Technologie (FRT), 75 - Paris (France)
Association pour la Recherche et le Developpement des Processus Industriels de l'Ecole des Mines, 06 - Valbonne (France)
Ecole Nationale Superieure des Mines de Paris, 06 - Valbonne (France). Centre de Mise en Forme des Materiaux.
Bollore Technologies, 29 - Quimper (France)

January 1987

SIGLECNRS AR 12248 / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc

Etude des mecanismes de claquage de films de polypropylene dans differents milieux ambiants

Chniba, Saied
Institut National Polytechnique de Grenoble, 38 - Saint-Martin-d'Heres (France)

January 1984

SIGLECNRS T 55060 / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc

Etude de la cristallisation de polypropylènes en écoulement: Application à la modélisation du procédé d'extrusion de film à plat - propriétés mécaniques résultantes

Jay, Frédéric

February 1996

...Ce travail vise a ameliorer les proprietes mecaniques de films de polypropylene biorientes utilis...

Structural transition of polypropylenes during cast film extrusion, heating and confinement

Di Sacco, Federico

January 2023

The aim of this thesis is to perform a broad study using innovative in-situ and real-time techniques...

AN INVESTIGATION OF THE " WALKING " BEHAVIOR IN THE MANUFACTURING OF BIAXIALLY ORIENTED POLYPROPYLENE FILMS

Raj Bodalia
S. James Pan

January 1988

An Investigation of the "walking " behavior in the manufacturing of biaxially oriented pol...

Mesures des propriétés et morphologiques de films de polypyrrole au moyen de techniques originales

Patois, Tilia
Fievet, Patrick
Martin, Nicolas
Moutarlier, V.
Monney, Sandrine
Lakard, Boris

January 2013

National audienceMesures des propriétés et morphologiques de films de polypyrrole au moyen de techni...

Cast-extruded syndiotactic polypropylene films: Preliminary structural and mechanical results

GUADAGNO, LIBERATA
NADDEO, CARLO
D' ANIELLO, CONCETTA
DI MAIO, LUCIANO
VITTORIA, VITTORIA
ACIERNO, DOMENICO

January 2002

Syndiotactic polypropylene (sPP) was cast-extruded with a laboratory single screw extruder, obtainin...

Extrusion and thermoforming of polypropylenes

Macauley, N.J.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN009714 / BLDSC - British Library D...

Amelioration des films en polypropylene pour condensateurs par le controle du processus de bietirage

Tamic, L.
Genillon, R.
Treny, C.
Duffo, P.
Monasse, B.
Haudin, J.M.
Bollore Technologies, 29 - Quimper (France)
Ministere de la Recherche et de la Technologie (MRT), 75 - Paris (France)

January 1988

Available at INIST (FR), Document Supply Service, under shelf-number : AR 13922 / INIST-CNRS - Insti...

Systematic Investigation on the Structure-Property Relationship in Isotactic Polypropylene Films Processed via Cast Film Extrusion

Di Sacco, Federico
Gahleitner, Markus
Wang, Jingbo
Portale, Giuseppe

August 2020

The effect of cast film extrusion processing conditions, such as the chill-roll temperature, tempera...

Etude experimentale et theorique de l'extrusion des melanges de caoutchoucs

Bennani, Najib
Ecole Nationale Superieure des Mines, 75 - Paris (France)

January 1987

SIGLECNRS T Bordereau / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc

Real-time structural characterization of isotactic polypropylene during cast film extrusion

Di Sacco F.
Solano E.
Malfois M.
Wang J.
Gahleitner M.
Pantani R.
Portale G.

January 2023

Understanding the crystallization behavior of semi-crystalline polymers during processing is key to ...

The extrusion, performance and characterization of metallocene catalysed polyethylene based packaging films

Beagan, C.M.

January 2000

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036227 / BLDSC - British Library D...

The effect of extrusion processing parameters on the die swell of polypropylene /

Van Puymbrouck, Niels(ugent)01301714
UGent.Faculteit Ingenieurswetenschappen en Architectuur.
Cardon, Ludwig(ugent)802000179080(viaf)305752280promotor
D'hooge, Dagmar(ugent)802000024082(viaf)344148996073759751721copromotor

Master of Science in de industriële wetenschappen: elektromechanica - Campus Schoonmeerse

Extrusion des Polymères

Lafleur, Pierre G.
Vergnes, Bruno

January 2014

National audienceL'extrusion est le plus important des procédés de transformation des polymères. Dan...

Etude de la fabrication de films minces en polypropylene par un procede de bietirage

Haudin, J.M.
Cotto, D.
Fonds de la Recherche et de la Technologie (FRT), 75 - Paris (France)
Association pour la Recherche et le Developpement des Processus Industriels de l'Ecole des Mines, 06 - Valbonne (France)
Ecole Nationale Superieure des Mines de Paris, 06 - Valbonne (France). Centre de Mise en Forme des Materiaux.
Bollore Technologies, 29 - Quimper (France)

January 1987

SIGLECNRS AR 12248 / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc

Etude des mecanismes de claquage de films de polypropylene dans differents milieux ambiants

Chniba, Saied
Institut National Polytechnique de Grenoble, 38 - Saint-Martin-d'Heres (France)

January 1984

SIGLECNRS T 55060 / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc

Etude de la cristallisation de polypropylènes en écoulement: Application à la modélisation du procédé d'extrusion de film à plat - propriétés mécaniques résultantes

Jay, Frédéric

February 1996

...Ce travail vise a ameliorer les proprietes mecaniques de films de polypropylene biorientes utilis...

Structural transition of polypropylenes during cast film extrusion, heating and confinement

Di Sacco, Federico

January 2023

The aim of this thesis is to perform a broad study using innovative in-situ and real-time techniques...

AN INVESTIGATION OF THE " WALKING " BEHAVIOR IN THE MANUFACTURING OF BIAXIALLY ORIENTED POLYPROPYLENE FILMS

Raj Bodalia
S. James Pan

January 1988

An Investigation of the "walking " behavior in the manufacturing of biaxially oriented pol...

Mesures des propriétés et morphologiques de films de polypyrrole au moyen de techniques originales

Patois, Tilia
Fievet, Patrick
Martin, Nicolas
Moutarlier, V.
Monney, Sandrine
Lakard, Boris

January 2013

National audienceMesures des propriétés et morphologiques de films de polypyrrole au moyen de techni...

Cast-extruded syndiotactic polypropylene films: Preliminary structural and mechanical results

GUADAGNO, LIBERATA
NADDEO, CARLO
D' ANIELLO, CONCETTA
DI MAIO, LUCIANO
VITTORIA, VITTORIA
ACIERNO, DOMENICO

January 2002

Syndiotactic polypropylene (sPP) was cast-extruded with a laboratory single screw extruder, obtainin...

Extrusion and thermoforming of polypropylenes

Macauley, N.J.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN009714 / BLDSC - British Library D...

Amelioration des films en polypropylene pour condensateurs par le controle du processus de bietirage

Tamic, L.
Genillon, R.
Treny, C.
Duffo, P.
Monasse, B.
Haudin, J.M.
Bollore Technologies, 29 - Quimper (France)
Ministere de la Recherche et de la Technologie (MRT), 75 - Paris (France)

January 1988

Available at INIST (FR), Document Supply Service, under shelf-number : AR 13922 / INIST-CNRS - Insti...

Systematic Investigation on the Structure-Property Relationship in Isotactic Polypropylene Films Processed via Cast Film Extrusion

Di Sacco, Federico
Gahleitner, Markus
Wang, Jingbo
Portale, Giuseppe

August 2020

The effect of cast film extrusion processing conditions, such as the chill-roll temperature, tempera...

Etude experimentale et theorique de l'extrusion des melanges de caoutchoucs

Bennani, Najib
Ecole Nationale Superieure des Mines, 75 - Paris (France)

January 1987

SIGLECNRS T Bordereau / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc

Real-time structural characterization of isotactic polypropylene during cast film extrusion

Di Sacco F.
Solano E.
Malfois M.
Wang J.
Gahleitner M.
Pantani R.
Portale G.

January 2023

Understanding the crystallization behavior of semi-crystalline polymers during processing is key to ...

The extrusion, performance and characterization of metallocene catalysed polyethylene based packaging films

Beagan, C.M.

January 2000

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036227 / BLDSC - British Library D...

The effect of extrusion processing parameters on the die swell of polypropylene /

Van Puymbrouck, Niels(ugent)01301714
UGent.Faculteit Ingenieurswetenschappen en Architectuur.
Cardon, Ludwig(ugent)802000179080(viaf)305752280promotor
D'hooge, Dagmar(ugent)802000024082(viaf)344148996073759751721copromotor

Master of Science in de industriële wetenschappen: elektromechanica - Campus Schoonmeerse

Extrusion des Polymères

Lafleur, Pierre G.
Vergnes, Bruno

January 2014

National audienceL'extrusion est le plus important des procédés de transformation des polymères. Dan...

Etude Theorique et Experimentale du Procede de Fabrication de Films Minces de Polypropylene par Extrusion-Bietirage

Abstract

Extracted data

Etude Theorique et Experimentale du Procede de Fabrication de Films Minces de Polypropylene par Extrusion-Bietirage

Abstract

Extracted data

Related items

Related items