The aim of the combined project 03 M 2013 'Dross cast gas turbine components made of silicon nitride' is the development and testing of ceramic components, which are produced in the dross casting process, which can be used in the area of the hot gas parts of a car gas turbine. The development of a chemically stable aquaeous dross which can be cast, the optimisation of the preparation parameters and the manufacture of components were carried out at Hoechst Ceram Tec. The mean component strength was increased during the project from 550 MPa to 850 MPa. Daimler-Benz designed, constructed and tested the stationary gas turbine parts of the intermediate internal diffuser ring and compressor turbine guide grid after manufacture on different test r...
Der Sonderforschungsbereich 339 'Schaufeln und Scheiben in Gasturbinen -Werkstoff- und Bauteilverhal...
The application of structural ceramic parts in gas turbines is supposed to increase efficiency and t...
Im Projekt wurden konventionell umgeformte Näpfe aus einem Aluminiumwerkstoff (AA6016) und einem Sta...
Die Zielsetzung dieses Verbundprojektes war die Entwicklung und die Erprobung von Keramikbauteilen, ...
Entsprechend der Zielsetzung im Verbundvorhaben hat Daimler-Benz die Erprobung von Keramikkomponente...
During the period of the report from 1.1.88 to 30.6.88, the work at Daimler-Benz according to the wo...
During the period of the report of 1.7.88-31.12.88, the work at Daimler-Benz was continued in the co...
It was the objective of the joint project to develop ceramic components which were manufactured by q...
During the period of the report from 1.7.87 to 31.12.87 the work at Daimler-Benz according to the wo...
During the period of the report from 1.1.87 to 30.6.87 the work regarding definition of components w...
Die Berechnungen zur optimalen Gestaltung des VT-Leitgitters wurden durch 3 Varianten ergaenzt, die ...
In der Flugzeugtriebswerkstechnik sind durch die Einfuehrung einkristalliner Turbinenschaufeln in de...
The German firm MTU, Munich, West Germany, is developing gas turbine components made of special cera...
The development of ceramic components for automobile gas turbine engines is described with attention...
The application of ceramic materials in gas turbines will make possible a drastic reduction of the c...
Der Sonderforschungsbereich 339 'Schaufeln und Scheiben in Gasturbinen -Werkstoff- und Bauteilverhal...
The application of structural ceramic parts in gas turbines is supposed to increase efficiency and t...
Im Projekt wurden konventionell umgeformte Näpfe aus einem Aluminiumwerkstoff (AA6016) und einem Sta...
Die Zielsetzung dieses Verbundprojektes war die Entwicklung und die Erprobung von Keramikbauteilen, ...
Entsprechend der Zielsetzung im Verbundvorhaben hat Daimler-Benz die Erprobung von Keramikkomponente...
During the period of the report from 1.1.88 to 30.6.88, the work at Daimler-Benz according to the wo...
During the period of the report of 1.7.88-31.12.88, the work at Daimler-Benz was continued in the co...
It was the objective of the joint project to develop ceramic components which were manufactured by q...
During the period of the report from 1.7.87 to 31.12.87 the work at Daimler-Benz according to the wo...
During the period of the report from 1.1.87 to 30.6.87 the work regarding definition of components w...
Die Berechnungen zur optimalen Gestaltung des VT-Leitgitters wurden durch 3 Varianten ergaenzt, die ...
In der Flugzeugtriebswerkstechnik sind durch die Einfuehrung einkristalliner Turbinenschaufeln in de...
The German firm MTU, Munich, West Germany, is developing gas turbine components made of special cera...
The development of ceramic components for automobile gas turbine engines is described with attention...
The application of ceramic materials in gas turbines will make possible a drastic reduction of the c...
Der Sonderforschungsbereich 339 'Schaufeln und Scheiben in Gasturbinen -Werkstoff- und Bauteilverhal...
The application of structural ceramic parts in gas turbines is supposed to increase efficiency and t...
Im Projekt wurden konventionell umgeformte Näpfe aus einem Aluminiumwerkstoff (AA6016) und einem Sta...