Technological characteristics of creep-feed grinding Raised cutting forces and reduced work piece temperatures: part 2

Investigation of in-process dressing in creep feed grinding

Rezaei, M

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:DX81157 / BLDSC - British Library Do...

Influence of the thermodynamic phenomena on the optimum cutting parameters in grinding

Kocman, Karel

July 2014

The quantitative and qualitative results of the technological process are mostly determined by the l...

A study of the wheel wear and thermal limitations in creep feed grinding with particular reference to coolant application, and the grinding of vertical faces and slots

Mindek, Richard Brian

January 1996

The critical limitations of wheel wear and thermal damage to the workpiece were investigated for alu...

Creep feed grinding An investigation of surface grinding with high depths of cut and low feed rates

Shafto, G.R

January 1974

SIGLEAvailable from British Library Document Supply Centre- DSC:D71610/87 / BLDSC - British Library ...

Creep-feed grinding A modern variant of the plane surface grinding process

Konig, W.
Lauer-Schmaltz, H.
Rolls Royce Ltd., Derby (UK)

January 1982

SIGLELD:8019.3153(PNR--90163) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Creep feed (single path) and conventional (multi-path) grinding Surface structure and comparison

Schleich, H.
Rolls Royce Ltd., Derby (UK)

January 1982

LD:8019.3153(PNR--90162) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Thermal aspects of the grinding process

Walsh, Darren Gerard

January 2000

THESIS 5636Grinding is a commonly used process for material removal. It has been used for a long tim...

Thermal Analysis of Creep Feed Grinding

Ortega, N.
Bravo, H.
Pombo, I.
Sánchez, J.A.
Vidal, G.

December 2015

AbstractCreep feed grinding is an abrasive finishing process characterized by low feed speeds (0.05-...

Experimental studies of the grinding process by planetary grinding head

Nikolai Kalinichenko

April 2019

The object of research is the process of creep feed grinding of parts of aircraft engines with hard-...

Creep-feed surface grinding

Salmon, S.C

January 1979

SIGLEAvailable from British Library Document Supply Centre- DSC:D72922/87 / BLDSC - British Library ...

DETERMINING THE CONDITIONS FOR DECREASING CUTTING FORCE AND TEMPERATURE DURING MACHINING

Fedir Nоvikоv
Vladimir Polyansky
Valentin Shkurupiy
Dmytro Novikov
Andrii Hutorov
Yevhen Ponomarenko
Oksana О. Yermolenko
Oleksii А. Yermolenko

December 2019

The theoretical approach to calculating and controlling the force and temperature parameters of edge...

Grinding Force of Cylindrical and Creep-Feed Grinding Modeling

Kovač, Pavel
Gostimirović, Marin

October 2018

This chapter presents an experimental study of grinding forces as relationship of workpiece speed v,...

EFFECT OF FACE COOLING ON WORKPIECE TEMPERATURES USING 2D AND 3D FINITE ELEMENT ANALYSIS OF CREEP-FEED GRINDING

David Andersonl
Andrew Warkentin
Robert Bauer

January 2008

This work uses validated 2D and 3D finite element models of the creep-feed grinding operation to stu...

The continuous dress creep feed form grinding of titanium alloys

Fursdon, P

January 1989

Available from British Library Document Supply Centre- DSC:DX94073 / BLDSC - British Library Documen...

Thermal aspects of grinding for surface integrity

Ju, Yongqing

January 1997

Thermal aspects of grinding are analyzed in detail since it is argued that temperature controls the ...

Investigation of in-process dressing in creep feed grinding

Rezaei, M

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:DX81157 / BLDSC - British Library Do...

Influence of the thermodynamic phenomena on the optimum cutting parameters in grinding

Kocman, Karel

July 2014

The quantitative and qualitative results of the technological process are mostly determined by the l...

A study of the wheel wear and thermal limitations in creep feed grinding with particular reference to coolant application, and the grinding of vertical faces and slots

Mindek, Richard Brian

January 1996

The critical limitations of wheel wear and thermal damage to the workpiece were investigated for alu...

Creep feed grinding An investigation of surface grinding with high depths of cut and low feed rates

Shafto, G.R

January 1974

SIGLEAvailable from British Library Document Supply Centre- DSC:D71610/87 / BLDSC - British Library ...

Creep-feed grinding A modern variant of the plane surface grinding process

Konig, W.
Lauer-Schmaltz, H.
Rolls Royce Ltd., Derby (UK)

January 1982

SIGLELD:8019.3153(PNR--90163) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Creep feed (single path) and conventional (multi-path) grinding Surface structure and comparison

Schleich, H.
Rolls Royce Ltd., Derby (UK)

January 1982

LD:8019.3153(PNR--90162) / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Thermal aspects of the grinding process

Walsh, Darren Gerard

January 2000

THESIS 5636Grinding is a commonly used process for material removal. It has been used for a long tim...

Thermal Analysis of Creep Feed Grinding

Ortega, N.
Bravo, H.
Pombo, I.
Sánchez, J.A.
Vidal, G.

December 2015

AbstractCreep feed grinding is an abrasive finishing process characterized by low feed speeds (0.05-...

Experimental studies of the grinding process by planetary grinding head

Nikolai Kalinichenko

April 2019

The object of research is the process of creep feed grinding of parts of aircraft engines with hard-...

Creep-feed surface grinding

Salmon, S.C

January 1979

SIGLEAvailable from British Library Document Supply Centre- DSC:D72922/87 / BLDSC - British Library ...

DETERMINING THE CONDITIONS FOR DECREASING CUTTING FORCE AND TEMPERATURE DURING MACHINING

Fedir Nоvikоv
Vladimir Polyansky
Valentin Shkurupiy
Dmytro Novikov
Andrii Hutorov
Yevhen Ponomarenko
Oksana О. Yermolenko
Oleksii А. Yermolenko

December 2019

The theoretical approach to calculating and controlling the force and temperature parameters of edge...

Grinding Force of Cylindrical and Creep-Feed Grinding Modeling

Kovač, Pavel
Gostimirović, Marin

October 2018

This chapter presents an experimental study of grinding forces as relationship of workpiece speed v,...

EFFECT OF FACE COOLING ON WORKPIECE TEMPERATURES USING 2D AND 3D FINITE ELEMENT ANALYSIS OF CREEP-FEED GRINDING

David Andersonl
Andrew Warkentin
Robert Bauer

January 2008

This work uses validated 2D and 3D finite element models of the creep-feed grinding operation to stu...

The continuous dress creep feed form grinding of titanium alloys

Fursdon, P

January 1989

Available from British Library Document Supply Centre- DSC:DX94073 / BLDSC - British Library Documen...

Thermal aspects of grinding for surface integrity

Ju, Yongqing

January 1997

Thermal aspects of grinding are analyzed in detail since it is argued that temperature controls the ...

Investigation of in-process dressing in creep feed grinding

Rezaei, M

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:DX81157 / BLDSC - British Library Do...

Influence of the thermodynamic phenomena on the optimum cutting parameters in grinding

Kocman, Karel

July 2014

The quantitative and qualitative results of the technological process are mostly determined by the l...

A study of the wheel wear and thermal limitations in creep feed grinding with particular reference to coolant application, and the grinding of vertical faces and slots

Mindek, Richard Brian

January 1996

The critical limitations of wheel wear and thermal damage to the workpiece were investigated for alu...

Technological characteristics of creep-feed grinding Raised cutting forces and reduced work piece temperatures: part 2

Abstract

Extracted data

Technological characteristics of creep-feed grinding Raised cutting forces and reduced work piece temperatures: part 2

Abstract

Extracted data

Related items

Related items