Investigation of electrogalvanised steel sheet with the aid of acoustic emission (part 2) Measurement and analysis of AE during tensile tests

Experimental studies of material loss due to erosion-corrosion

Kastner, W.
Riedle, K.
Tratz, H
Central Electricity Generating Board (CEGB), London (United Kingdom)

January 1987

Translated from German (VGB Kraftwerkstechnik, May 1984 v. 64(5) p. 452-465)SIGLEAvailable from Brit...

Bendability evaluation of sheet metals in three-point bending test by using acoustic emission features

Seemuang, N.
Panich, S.
Slatter, T.

August 2018

In this work, bendability evaluation of three sheet metals, a galvanized steel (JAC780Y), a stainles...

Galvanic deposition of aluminium alloys

Eckert, J.
Galova, M
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1987

14.00; Translated from Czech (Hutn. Listy 1987 v. 42(5) p. 335-338)SIGLEAvailable from British Libra...

Examination of acoustic emission in welding of austenitic steels

Apasov, A.
Apasov, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Svar. Proizvod. 2000 (8) 5-10)Available from British Library Document Suppl...

Results of acoustic emission measurements in tensile tests on large specimens with notches

Priban, M.
Slama, K.
Stepanek, S
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1990

28.00; Translated from Czech. (Kovove Mater. 1989 v. 27(2) p. 240-252)Available from British Library...

Using the AE method for testing alloy steel at low temperatures

Parkhomenko, I.
Yaremenko, M.
Zhbanov, Y.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1990

20.00; Translated from Russian (Tekhnicheskaya Diagnostika i Nerazhrushayushchii Kontrol' 1990 v. 2(...

Examination of the structure and properties of electroslag-heated cast 5khNM die steel

Grabin, V.F.
Denisenko, A.V.
Adeeva, L.I
Sorokina, L.Yu.
Ovchinnikov, T.Kh.
Mosendz, N.A.
Nosatov, V.A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1987

12.00; Translated from Ukranian (Probl. Spetsial. Elektrometall. 1986 v. 2(4) p. 22-27)SIGLEAvailabl...

A study of acoustic emission properties on welded A240GR 317L stainless steel using acoustic amission transmission under tensile load

Muhammad Shahmi, Marsahid

June 2012

This project presented the study on AE properties of welded A240GR 317L stainless steel using Acoust...

A study of acoustic emission in tensile test for metallic materials

Mohd Zambri, Abidin

December 2010

This project is described about the research and experimental study of Acoustic Emission (AE) proper...

Study of the behaviour of steels during tensile stressing below the upper yield point

Kravcenko, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

20.00; Translated from German (Materialpruefung 1970 v. 12(11) p. 373-377)Available from British Lib...

Examination of the mechanical properties of a high-manganese steel for electroslag hardfacing of components

Ponomarenko, V.P.
Shvartser, A.Ya.
Stoiko, V.P.
Stroganov, G.V.
Sapronov, Yu.A
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1986

3.00; Translated from Russian (Problemy Spetsial'noi Elektromet. 1986 v. 2(2) p. 13-16)SIGLEAvailabl...

Experimental determination of the metallurgical and technological parameters in surfacing with austenitic strip electrodes

Pilous, V.
Kovarik, R
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1986

28.00; Translated from Czech (Zvaranie 1986 v. 35(6) p. 161-172)SIGLEAvailable from British Library ...

Tensile failure analysis of structural materials using acoustic emission.

Mowat, John J.
Jihan, Sha
Droubi, Mohamad G.

July 2016

Materials testing is an extremely important process in the modern world with new colossal structures...

Weldability of sheets of various aluminium alloys

Pravilov, I.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Report of the E O Paton Electric Welding Inst., Kiev 1998)Available from Br...

Ultrasonic testing of welded joints obtained from austenitic steels in the chemical engineering industry

Mikhovski, M.
Lozev, M.
Blagoev, D
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Bulgarian (Mashinostroene 1985 (3) p. 120-123)Available from British Library ...

Experimental studies of material loss due to erosion-corrosion

Kastner, W.
Riedle, K.
Tratz, H
Central Electricity Generating Board (CEGB), London (United Kingdom)

January 1987

Translated from German (VGB Kraftwerkstechnik, May 1984 v. 64(5) p. 452-465)SIGLEAvailable from Brit...

Bendability evaluation of sheet metals in three-point bending test by using acoustic emission features

Seemuang, N.
Panich, S.
Slatter, T.

August 2018

In this work, bendability evaluation of three sheet metals, a galvanized steel (JAC780Y), a stainles...

Galvanic deposition of aluminium alloys

Eckert, J.
Galova, M
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1987

14.00; Translated from Czech (Hutn. Listy 1987 v. 42(5) p. 335-338)SIGLEAvailable from British Libra...

Examination of acoustic emission in welding of austenitic steels

Apasov, A.
Apasov, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Svar. Proizvod. 2000 (8) 5-10)Available from British Library Document Suppl...

Results of acoustic emission measurements in tensile tests on large specimens with notches

Priban, M.
Slama, K.
Stepanek, S
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1990

28.00; Translated from Czech. (Kovove Mater. 1989 v. 27(2) p. 240-252)Available from British Library...

Using the AE method for testing alloy steel at low temperatures

Parkhomenko, I.
Yaremenko, M.
Zhbanov, Y.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1990

20.00; Translated from Russian (Tekhnicheskaya Diagnostika i Nerazhrushayushchii Kontrol' 1990 v. 2(...

Examination of the structure and properties of electroslag-heated cast 5khNM die steel

Grabin, V.F.
Denisenko, A.V.
Adeeva, L.I
Sorokina, L.Yu.
Ovchinnikov, T.Kh.
Mosendz, N.A.
Nosatov, V.A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1987

12.00; Translated from Ukranian (Probl. Spetsial. Elektrometall. 1986 v. 2(4) p. 22-27)SIGLEAvailabl...

A study of acoustic emission properties on welded A240GR 317L stainless steel using acoustic amission transmission under tensile load

Muhammad Shahmi, Marsahid

June 2012

This project presented the study on AE properties of welded A240GR 317L stainless steel using Acoust...

A study of acoustic emission in tensile test for metallic materials

Mohd Zambri, Abidin

December 2010

This project is described about the research and experimental study of Acoustic Emission (AE) proper...

Study of the behaviour of steels during tensile stressing below the upper yield point

Kravcenko, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

20.00; Translated from German (Materialpruefung 1970 v. 12(11) p. 373-377)Available from British Lib...

Examination of the mechanical properties of a high-manganese steel for electroslag hardfacing of components

Ponomarenko, V.P.
Shvartser, A.Ya.
Stoiko, V.P.
Stroganov, G.V.
Sapronov, Yu.A
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1986

3.00; Translated from Russian (Problemy Spetsial'noi Elektromet. 1986 v. 2(2) p. 13-16)SIGLEAvailabl...

Experimental determination of the metallurgical and technological parameters in surfacing with austenitic strip electrodes

Pilous, V.
Kovarik, R
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1986

28.00; Translated from Czech (Zvaranie 1986 v. 35(6) p. 161-172)SIGLEAvailable from British Library ...

Tensile failure analysis of structural materials using acoustic emission.

Mowat, John J.
Jihan, Sha
Droubi, Mohamad G.

July 2016

Materials testing is an extremely important process in the modern world with new colossal structures...

Weldability of sheets of various aluminium alloys

Pravilov, I.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Russian (Report of the E O Paton Electric Welding Inst., Kiev 1998)Available from Br...

Ultrasonic testing of welded joints obtained from austenitic steels in the chemical engineering industry

Mikhovski, M.
Lozev, M.
Blagoev, D
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Bulgarian (Mashinostroene 1985 (3) p. 120-123)Available from British Library ...

Experimental studies of material loss due to erosion-corrosion

Kastner, W.
Riedle, K.
Tratz, H
Central Electricity Generating Board (CEGB), London (United Kingdom)

January 1987

Translated from German (VGB Kraftwerkstechnik, May 1984 v. 64(5) p. 452-465)SIGLEAvailable from Brit...

Bendability evaluation of sheet metals in three-point bending test by using acoustic emission features

Seemuang, N.
Panich, S.
Slatter, T.

August 2018

In this work, bendability evaluation of three sheet metals, a galvanized steel (JAC780Y), a stainles...

Galvanic deposition of aluminium alloys

Eckert, J.
Galova, M
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1987

14.00; Translated from Czech (Hutn. Listy 1987 v. 42(5) p. 335-338)SIGLEAvailable from British Libra...

Investigation of electrogalvanised steel sheet with the aid of acoustic emission (part 2) Measurement and analysis of AE during tensile tests

Abstract

Extracted data

Investigation of electrogalvanised steel sheet with the aid of acoustic emission (part 2) Measurement and analysis of AE during tensile tests

Abstract

Extracted data

Related items

Related items