The influence of thermohumid conditions on compression after impact Properties of fibre reinforced laminate materials

Thermo-mechanical responses of polymeric fibres

Mukhopadhyay, S.K

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D79782 / BLDSC - British Library Doc...

Residual strength evaluation after impact tests in extreme temperature conditions. New equipment for CAI tests

Lopresto, Valentina
Papa, Ilaria
Langella, Antonio

January 2017

A large experimental campaign has included low velocity falling weight tests at room and low tempera...

Influence of materials processing on impact properties of compression-moulded commingled thermoplastic composites

Santulli Carlo
Brooks Richard
Long Andrew C
Rudd Christopher D
Warrior Nicholas A

January 2002

The impact properties of commingled E-glass-polypropylene composites with varying fibre architecture...

Post-impact compression behaviour of continuous fibre composite materials

Prichard, J.C.

January 1991

SIGLEAvailable from British Library Document Supply Centre-DSC:DX203161 / BLDSC - British Library Do...

The influence of thermohumid conditions on compression-after-impact properties of fibre-reinforced laminate materials

Roslan A. Aziz (7124582)

January 2000

Advance composite materials based mainly on epoxy resins are being used in increasing amounts in aer...

Compressive residual strength at low temperatures of composite laminates subjected to low-velocity impacts

Sánchez Sáez, Sonia
Barbero Pozuelo, Enrique
Navarro Ugena, Carlos

October 2008

7 pages, 8 figures.Compression after impact behaviour of different carbon fibre reinforced composite...

Studies on the compressive behaviour of fibre-reinforced plastics

Matthews, F.Haeberle, J
Imperial Coll. of Science Technology and Medicine, London (United Kingdom). Centre for Composite Materials

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:q93/13483 / BLDSC - British Library ...

Impact and damage resistance studies on thermoplastic reinforced composites

Muhammad Shah Abdullah

January 2021

Composites are a well-known material and are widely used in the industries because of their desirabl...

Factors affecting the failure mechanisms in compression after impact of continuous fibre composites

Kay, M.L

January 1995

SIGLEAvailable from British Library Document Supply Centre- DSC:DXN003363 / BLDSC - British Library ...

Effect of thickness and reinforcement configuration on flexural and impact behaviour of GFRP laminates after exposure to elevated temperatures

Bazli, Milad
Ashrafi, Hamed
Jafari, Armin
Zhao, Xiao-Ling
Gholipour, Hamed
Oskouei, Asghar Vatani

January 2019

This study investigates the flexural and impact behaviour of GFRP laminates after exposure to elevat...

Compression-after impact behavior of laminated composite plates subjected to low velocity impact in high temperatures

Aktaş M.
Karakuzu R.
Arman Y.

January 2009

The purpose of this study is to investigate the effect of the impact test temperature on compression...

The mechanical and thermal behaviour of polymers under high strain rate compression

Dawson, P.C

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:DX178273 / BLDSC - British Library D...

The effect of low velocity impact damage on the compressive properties of carbon fibre reinforced composites

Clarke, M.

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN015826 / BLDSC - British Library D...

Influence of temperature on the impact behavior and damage tolerance of hybrid woven-ply thermoplastic laminates for aeronautical applications

Dubary, N.
Taconet, G.
Bouvet, Christophe
Vieille, Benoît

May 2017

International audienceImpact damage tolerance of hybrid carbon and glass fibers woven-ply reinforced...

Compression after Impact of Carbon/Geopolymer Sandwich Panels

Kadlec, Martin
Martaus, František
Hron, Robin

June 2018

Geopolymers are amorphous aluminosilicate materials which combine low temperature, polymer-like proc...

Thermo-mechanical responses of polymeric fibres

Mukhopadhyay, S.K

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D79782 / BLDSC - British Library Doc...

Residual strength evaluation after impact tests in extreme temperature conditions. New equipment for CAI tests

Lopresto, Valentina
Papa, Ilaria
Langella, Antonio

January 2017

A large experimental campaign has included low velocity falling weight tests at room and low tempera...

Influence of materials processing on impact properties of compression-moulded commingled thermoplastic composites

Santulli Carlo
Brooks Richard
Long Andrew C
Rudd Christopher D
Warrior Nicholas A

January 2002

The impact properties of commingled E-glass-polypropylene composites with varying fibre architecture...

Post-impact compression behaviour of continuous fibre composite materials

Prichard, J.C.

January 1991

SIGLEAvailable from British Library Document Supply Centre-DSC:DX203161 / BLDSC - British Library Do...

The influence of thermohumid conditions on compression-after-impact properties of fibre-reinforced laminate materials

Roslan A. Aziz (7124582)

January 2000

Advance composite materials based mainly on epoxy resins are being used in increasing amounts in aer...

Compressive residual strength at low temperatures of composite laminates subjected to low-velocity impacts

Sánchez Sáez, Sonia
Barbero Pozuelo, Enrique
Navarro Ugena, Carlos

October 2008

7 pages, 8 figures.Compression after impact behaviour of different carbon fibre reinforced composite...

Studies on the compressive behaviour of fibre-reinforced plastics

Matthews, F.Haeberle, J
Imperial Coll. of Science Technology and Medicine, London (United Kingdom). Centre for Composite Materials

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:q93/13483 / BLDSC - British Library ...

Impact and damage resistance studies on thermoplastic reinforced composites

Muhammad Shah Abdullah

January 2021

Composites are a well-known material and are widely used in the industries because of their desirabl...

Factors affecting the failure mechanisms in compression after impact of continuous fibre composites

Kay, M.L

January 1995

SIGLEAvailable from British Library Document Supply Centre- DSC:DXN003363 / BLDSC - British Library ...

Effect of thickness and reinforcement configuration on flexural and impact behaviour of GFRP laminates after exposure to elevated temperatures

Bazli, Milad
Ashrafi, Hamed
Jafari, Armin
Zhao, Xiao-Ling
Gholipour, Hamed
Oskouei, Asghar Vatani

January 2019

This study investigates the flexural and impact behaviour of GFRP laminates after exposure to elevat...

Compression-after impact behavior of laminated composite plates subjected to low velocity impact in high temperatures

Aktaş M.
Karakuzu R.
Arman Y.

January 2009

The purpose of this study is to investigate the effect of the impact test temperature on compression...

The mechanical and thermal behaviour of polymers under high strain rate compression

Dawson, P.C

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:DX178273 / BLDSC - British Library D...

The effect of low velocity impact damage on the compressive properties of carbon fibre reinforced composites

Clarke, M.

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN015826 / BLDSC - British Library D...

Influence of temperature on the impact behavior and damage tolerance of hybrid woven-ply thermoplastic laminates for aeronautical applications

Dubary, N.
Taconet, G.
Bouvet, Christophe
Vieille, Benoît

May 2017

International audienceImpact damage tolerance of hybrid carbon and glass fibers woven-ply reinforced...

Compression after Impact of Carbon/Geopolymer Sandwich Panels

Kadlec, Martin
Martaus, František
Hron, Robin

June 2018

Geopolymers are amorphous aluminosilicate materials which combine low temperature, polymer-like proc...

Thermo-mechanical responses of polymeric fibres

Mukhopadhyay, S.K

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D79782 / BLDSC - British Library Doc...

Residual strength evaluation after impact tests in extreme temperature conditions. New equipment for CAI tests

Lopresto, Valentina
Papa, Ilaria
Langella, Antonio

January 2017

A large experimental campaign has included low velocity falling weight tests at room and low tempera...

Influence of materials processing on impact properties of compression-moulded commingled thermoplastic composites

Santulli Carlo
Brooks Richard
Long Andrew C
Rudd Christopher D
Warrior Nicholas A

January 2002

The impact properties of commingled E-glass-polypropylene composites with varying fibre architecture...

The influence of thermohumid conditions on compression after impact Properties of fibre reinforced laminate materials

Abstract

Extracted data

The influence of thermohumid conditions on compression after impact Properties of fibre reinforced laminate materials

Abstract

Extracted data

Related items

Related items