Three-dimensional design and optimisation of turbomachinery blades using the Navier-Stokes equations

Numerical optimization for turbomachinery blades aerodynamic design using a gradient method coupled with Navier-Stokes solver

Burguburu, Stephane
Toussaint, Clement
Leroy, Gilles
Office National d'Etudes et de Recherches Aerospatiales (ONERA), 92 - Chatillon (France)

January 2001

Communication to : 15th international symposium on airbreathing engines, Bangladore (Inde), Septembe...

Turbomachinery component design by means of CFD

Braembussche, R. A. van den

January 2002

A short overview of the main techniques for turbomachinery blade design based on CFD is followed by ...

Three-dimensional aerodynamic studies of a turbine stage in a transient flow facility

Slater, J

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:D179267 / BLDSC - British Library Do...

Navier-Stokes method applied to turbomachinery blade design

Stow, P
Rolls-Royce plc. (United Kingdom)

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:8019.3153(RRR-PNR--90620) / BLDSC - ...

Three-dimensional design methods for turbomachinery

Shrinivas, G.N.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:D192321 / BLDSC - British Library Doc...

Numerical and experimental investigations of three dimensional turbomachine flows

Crosby, N

January 1982

SIGLEAvailable from British Library Document Supply Centre- DSC:D44664/83 / BLDSC - British Library ...

Computation of three-dimensional flow through turbomachines

Rahmatalla, M.A.F.

January 1980

SIGLELD:D46966/83 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Three dimensional unsteady flow for an oscillating turbine blade

Bell, D.L.

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN024840 / BLDSC - British Library D...

Turbomachinery blade design using advanced calculation methods

Stow, P
Rolls-Royce Ltd., Derby (United Kingdom)

January 1988

Paper at Cranfield Fluid Engineering Course on Advanced Flow Calculations for Internal Flow and Turb...

Three-dimensional design of radial-inflow turbines

Zangeneh-Kazemi, M

January 1988

SIGLEAvailable from British Library Document Supply Centre- DSC:D59533 / BLDSC - British Library Doc...

by

Turbomachinery Systems
Committee Chair
Dr. Mark
G. Turner

September 2016

Turbomachinery blades are an integral part of air breathing propulsion systems, gas and steam turbin...

Advanced 3D inverse method for designing turbomachine blades

Dang, T.

December 1995

To meet the goal of 60% plant-cycle efficiency or better set in the ATS Program for baseload utility...

A linear approach to the multi-parameter design of three-dimensional tubomachinery blades

Shahpar, S.
Lapworth, B.
Pablos, T. de
Rolls-Royce plc (United Kingdom)

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:8019.322(92559) / BLDSC - British Lib...

Turbomachinery blade optimization using the Navier-Stokes equations

Chand, K. K.
Lee, K. D.

December 1997

A method is presented to perform aerodynamic design optimization of turbomachinery blades. The metho...

A computational method for the aerodynamic design of transonic turbine blades

Paige, R.W
Cambridge Univ. (United Kingdom)

January 1983

SIGLEAvailable from British Library Lending Division - LD:D54435/85 / BLDSC - British Library Docume...

Numerical optimization for turbomachinery blades aerodynamic design using a gradient method coupled with Navier-Stokes solver

Burguburu, Stephane
Toussaint, Clement
Leroy, Gilles
Office National d'Etudes et de Recherches Aerospatiales (ONERA), 92 - Chatillon (France)

January 2001

Communication to : 15th international symposium on airbreathing engines, Bangladore (Inde), Septembe...

Turbomachinery component design by means of CFD

Braembussche, R. A. van den

January 2002

A short overview of the main techniques for turbomachinery blade design based on CFD is followed by ...

Three-dimensional aerodynamic studies of a turbine stage in a transient flow facility

Slater, J

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:D179267 / BLDSC - British Library Do...

Navier-Stokes method applied to turbomachinery blade design

Stow, P
Rolls-Royce plc. (United Kingdom)

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:8019.3153(RRR-PNR--90620) / BLDSC - ...

Three-dimensional design methods for turbomachinery

Shrinivas, G.N.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:D192321 / BLDSC - British Library Doc...

Numerical and experimental investigations of three dimensional turbomachine flows

Crosby, N

January 1982

SIGLEAvailable from British Library Document Supply Centre- DSC:D44664/83 / BLDSC - British Library ...

Computation of three-dimensional flow through turbomachines

Rahmatalla, M.A.F.

January 1980

SIGLELD:D46966/83 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Three dimensional unsteady flow for an oscillating turbine blade

Bell, D.L.

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN024840 / BLDSC - British Library D...

Turbomachinery blade design using advanced calculation methods

Stow, P
Rolls-Royce Ltd., Derby (United Kingdom)

January 1988

Paper at Cranfield Fluid Engineering Course on Advanced Flow Calculations for Internal Flow and Turb...

Three-dimensional design of radial-inflow turbines

Zangeneh-Kazemi, M

January 1988

SIGLEAvailable from British Library Document Supply Centre- DSC:D59533 / BLDSC - British Library Doc...

by

Turbomachinery Systems
Committee Chair
Dr. Mark
G. Turner

September 2016

Turbomachinery blades are an integral part of air breathing propulsion systems, gas and steam turbin...

Advanced 3D inverse method for designing turbomachine blades

Dang, T.

December 1995

To meet the goal of 60% plant-cycle efficiency or better set in the ATS Program for baseload utility...

A linear approach to the multi-parameter design of three-dimensional tubomachinery blades

Shahpar, S.
Lapworth, B.
Pablos, T. de
Rolls-Royce plc (United Kingdom)

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:8019.322(92559) / BLDSC - British Lib...

Turbomachinery blade optimization using the Navier-Stokes equations

Chand, K. K.
Lee, K. D.

December 1997

A method is presented to perform aerodynamic design optimization of turbomachinery blades. The metho...

A computational method for the aerodynamic design of transonic turbine blades

Paige, R.W
Cambridge Univ. (United Kingdom)

January 1983

SIGLEAvailable from British Library Lending Division - LD:D54435/85 / BLDSC - British Library Docume...

Numerical optimization for turbomachinery blades aerodynamic design using a gradient method coupled with Navier-Stokes solver

Burguburu, Stephane
Toussaint, Clement
Leroy, Gilles
Office National d'Etudes et de Recherches Aerospatiales (ONERA), 92 - Chatillon (France)

January 2001

Communication to : 15th international symposium on airbreathing engines, Bangladore (Inde), Septembe...

Turbomachinery component design by means of CFD

Braembussche, R. A. van den

January 2002

A short overview of the main techniques for turbomachinery blade design based on CFD is followed by ...

Three-dimensional aerodynamic studies of a turbine stage in a transient flow facility

Slater, J

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:D179267 / BLDSC - British Library Do...

Three-dimensional design and optimisation of turbomachinery blades using the Navier-Stokes equations

Abstract

Extracted data

Three-dimensional design and optimisation of turbomachinery blades using the Navier-Stokes equations

Abstract

Extracted data

Related items

Related items