Stress intensity factors for interacting cracks

The interaction and growth of two surface cracks under fatigue loading

Leek, T.H.

January 1990

SIGLEAvailable from British Library Document Supply Centre-DSC:DX194431 / BLDSC - British Library Do...

Stress intensity factors and weight functions for special crack problems

Fett, T.
Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Materialforschung

January 1998

The failure of cracked components is governed by the stresses in the vicinity of the crack tip. The ...

Stress intensity due to residual stresses

Health and Safety Executive, London (United Kingdom)
AEA Technology plc, Harwell (United Kingdom)

January 2002

SIGLEAvailable from British Library Document Supply Centre-DSC:6244.385(2000/019) / BLDSC - British ...

Stress intensity factors for cracks at loaded holes

Tweed, J.
Rooke, D.P.
Royal Aircraft Establishment, Farnborough (UK)

January 1981

SIGLELD:8717.806(RAE-TR--81086). / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Stress intensity for interacting flaws Part 2: a literature survey of fracture criteria

Ruiz, C.
Phang, Y.P.
Oxford Univ. (UK). Dept. of Engineering Science

LD:7623.47(OUEL--1367/81). / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Stress intensity factors for cracks in stiffened sheets

Rooke, D.P.
Cartwright, D.J.
Davis, E
Royal Aircraft Establishment (RAE), Farnborough (United Kingdom)

January 1987

Report prepared Jul 1975Available from British Library Document Supply Centre- DSC:8717.806(RAE-TR--...

Calculation of stress intensity factors for elliptical and semielliptical cracks in blocks and cylinders

Blackburn, W.S.
Hellen, T.K
Central Electricity Generating Board (CEGB), Berkeley (United Kingdom). Berkeley Nuclear Labs

January 1974

SIGLEAvailable from British Library Document Supply Centre- DSC:3106.076(CEGB-RD/B--N3103) / BLDSC -...

Stress intensity factor for small-to-medium cracks

Kotooussov, A.
Jones, R.

January 2002

http://www.emas.co.uk/structural_integrity-ECF14-FractureMechanicsBeyond2000.htm

Stress intensity factor solutions for edge cracked plates loaded under displacement control

Sharples, J.K
UKAEA Risley Nuclear Power Development Establishment (United Kingdom)

January 1986

4.00Available from British Library Document Supply Centre- DSC:9091.9F(ND-R--1337(R)) / BLDSC - Brit...

Stress intensity factors for cracks inititated from a notch

Lukas, P
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Czech (Zvaranie 1986 v. 35(10) p. 290-294)Available from British Library Docu...

Crack growth at stress concentrations

Shin, C.-S

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D58666/86 / BLDSC - British Library ...

Stress intensity factors for plates and shells with long part-through cracks, as calculated by a line-spring model

Ewing, D.J.F
Central Electricity Generating Board (CEGB), Leatherhead (United Kingdom). Technology Planning and Research Div

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:3106.12875(TPRD/L--3163/R87) / BLDSC...

Stress intensity factors for corner cracks in loaded holes in lugs and wide plates

Engineering Sciences Data Unit, London (UK)

January 1984

SIGLELD:3769.95V(ESDU--83033) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Stress Intensity Factors - T-Stresses - Weight Functions

Fett, Theo

July 2019

Failure of cracked components is governed by the stresses in the vicinity of the crack tip. The sing...

Stress intensity for interacting flaws Part 3: photoelastic determination of mixed modes stress intensity factors for interacting flaws

Ruiz, C.
Phang, Y.P.
Oxford Univ. (UK). Dept. of Engineering Science

LD:7623.47(OUEL--1368/81). / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

The interaction and growth of two surface cracks under fatigue loading

Leek, T.H.

January 1990

SIGLEAvailable from British Library Document Supply Centre-DSC:DX194431 / BLDSC - British Library Do...

Stress intensity factors and weight functions for special crack problems

Fett, T.
Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Materialforschung

January 1998

The failure of cracked components is governed by the stresses in the vicinity of the crack tip. The ...

Stress intensity due to residual stresses

Health and Safety Executive, London (United Kingdom)
AEA Technology plc, Harwell (United Kingdom)

January 2002

SIGLEAvailable from British Library Document Supply Centre-DSC:6244.385(2000/019) / BLDSC - British ...

Stress intensity factors for cracks at loaded holes

Tweed, J.
Rooke, D.P.
Royal Aircraft Establishment, Farnborough (UK)

January 1981

SIGLELD:8717.806(RAE-TR--81086). / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Stress intensity for interacting flaws Part 2: a literature survey of fracture criteria

Ruiz, C.
Phang, Y.P.
Oxford Univ. (UK). Dept. of Engineering Science

LD:7623.47(OUEL--1367/81). / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Stress intensity factors for cracks in stiffened sheets

Rooke, D.P.
Cartwright, D.J.
Davis, E
Royal Aircraft Establishment (RAE), Farnborough (United Kingdom)

January 1987

Report prepared Jul 1975Available from British Library Document Supply Centre- DSC:8717.806(RAE-TR--...

Calculation of stress intensity factors for elliptical and semielliptical cracks in blocks and cylinders

Blackburn, W.S.
Hellen, T.K
Central Electricity Generating Board (CEGB), Berkeley (United Kingdom). Berkeley Nuclear Labs

January 1974

SIGLEAvailable from British Library Document Supply Centre- DSC:3106.076(CEGB-RD/B--N3103) / BLDSC -...

Stress intensity factor for small-to-medium cracks

Kotooussov, A.
Jones, R.

January 2002

http://www.emas.co.uk/structural_integrity-ECF14-FractureMechanicsBeyond2000.htm

Stress intensity factor solutions for edge cracked plates loaded under displacement control

Sharples, J.K
UKAEA Risley Nuclear Power Development Establishment (United Kingdom)

January 1986

4.00Available from British Library Document Supply Centre- DSC:9091.9F(ND-R--1337(R)) / BLDSC - Brit...

Stress intensity factors for cracks inititated from a notch

Lukas, P
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Czech (Zvaranie 1986 v. 35(10) p. 290-294)Available from British Library Docu...

Crack growth at stress concentrations

Shin, C.-S

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D58666/86 / BLDSC - British Library ...

Stress intensity factors for plates and shells with long part-through cracks, as calculated by a line-spring model

Ewing, D.J.F
Central Electricity Generating Board (CEGB), Leatherhead (United Kingdom). Technology Planning and Research Div

January 1987

SIGLEAvailable from British Library Document Supply Centre- DSC:3106.12875(TPRD/L--3163/R87) / BLDSC...

Stress intensity factors for corner cracks in loaded holes in lugs and wide plates

Engineering Sciences Data Unit, London (UK)

January 1984

SIGLELD:3769.95V(ESDU--83033) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Stress Intensity Factors - T-Stresses - Weight Functions

Fett, Theo

July 2019

Failure of cracked components is governed by the stresses in the vicinity of the crack tip. The sing...

Stress intensity for interacting flaws Part 3: photoelastic determination of mixed modes stress intensity factors for interacting flaws

Ruiz, C.
Phang, Y.P.
Oxford Univ. (UK). Dept. of Engineering Science

LD:7623.47(OUEL--1368/81). / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

The interaction and growth of two surface cracks under fatigue loading

Leek, T.H.

January 1990

SIGLEAvailable from British Library Document Supply Centre-DSC:DX194431 / BLDSC - British Library Do...

Stress intensity factors and weight functions for special crack problems

Fett, T.
Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Materialforschung

January 1998

The failure of cracked components is governed by the stresses in the vicinity of the crack tip. The ...

Stress intensity due to residual stresses

Health and Safety Executive, London (United Kingdom)
AEA Technology plc, Harwell (United Kingdom)

January 2002

SIGLEAvailable from British Library Document Supply Centre-DSC:6244.385(2000/019) / BLDSC - British ...

Stress intensity factors for interacting cracks

Abstract

Extracted data

Stress intensity factors for interacting cracks

Abstract

Extracted data

Related items

Related items