Effect of the thermophysical parameters of the frozen mould on the casting properties of aluminium alloys

Calculating the solidification of castings in hot investment casting moulds with no insulation

Neustruev, A.A.
Gurevich, M.M
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 124-125)SIGLEAvaila...

Effect of the temperature of isothermal transformation on the structured properties of austempered high-strength cast iron

Tibul'chuk, E.
Koval'skii, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Protsessy Lit'ya 1999 (1) p. 32-36)Available from British Library Document ...

Influence of temperature conditions in a mould on quality of high - pressure casts

Štrobach, Václav

February 2012

katedra: KSP; rozsah: 123The thesis deals new knowledge about influences between temperature conditi...

Examination of the effect of temperature on physical processes in the material-substrate system in casting from a dispersed melt

Zhuk, G.
Pap, P.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Russian (Probl. Spetsial'noi Elektrometallurgii 1995 (3) p. 32-37)Available from Bri...

Effect of plastic deformation on the properties of forging VAD15 aluminium alloy and welded joints in this alloy

Lukin, V.
Arzamasov, V.
Iod, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Russian (Svar. Proizvod. 1999 36(11) p.6-8)SIGLEAvailable from British Library Docum...

Optimization of conditions for casting of aluminium alloys by diminishing mechanical buckling when furane cores are applied

Dlagnikov, I.
Stoianov, N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Bulgarian (Mashinostroene 1988 (5) p. 217-221)Available from British Library Documen...

Effect of plasma reagent treatment of the melt on the microstructure and strength characteristics of aluminium alloys

Narivskiy, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Russian (Protsessy Lit'ya 1997 (2) p. 21-25)SIGLEAvailable from British Library Docu...

Properties of formed Al-alloys in as-cast state

Pelcman, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Czech (Hutnik (Prague) 1987 v. 37(7) p. 270-276)Available from British Librar...

Effect of the cooling conditions of the casting on the structure of ductile iron

Vasil'ev, I.
Tan, N.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Ukrainian (Protessy Lit'ya 1997 (4) p. 100-104)SIGLEAvailable from British Library D...

The optimization of the thermal conditions when moulding casts from the aluminium alloys in metal moulds under natural conditions of its cooling

Churkin Alexei Borisovich

January 1992

The purpose of the work: the development of methods of optimization of the thermal conditions for ca...

Examination of the effect of plasma-reagent treatment of the melt on the strength characteristics of aluminium alloys

Naidek, V.
Minh, L.F.
Narivskii, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Ukrainian (Prob. Spets. Elektrometallurgii 1997 (4) p. 32-34)Available from British ...

Thermal analysis of foundry aluminium alloys

Koreny, R.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proceedings of Aluminium-2001, Decin, Czech Republic, Sept. 2001)Available fr...

Effects of the solidification temperature range for iron-carbon alloys and the shape of the space within the mould on pouring time

Golubev, V.B.
Ryzhikov, A.A.
Chukhno, S.A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (6) p. 118-121)SIGLE...

Effect of processing factors on properties of Al-Mg-Si alloys

Placek, K
Nemethova, L.
Grutkova, J.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Czech. (Hutn. Listy 1986 (6) p. 407-411)Available from British Library Docume...

Effect of aluminium on the parameters of eutectic transformation L<->#gamma#+Mo_2C in the Ni-Mo-Al-C quatenary system

Barabash, O.
Legkaya, T.
Petrushin, N.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Poroshk. Metall. 1997 (11-12) p. 111-115)Available from British Library Doc...

Calculating the solidification of castings in hot investment casting moulds with no insulation

Neustruev, A.A.
Gurevich, M.M
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 124-125)SIGLEAvaila...

Effect of the temperature of isothermal transformation on the structured properties of austempered high-strength cast iron

Tibul'chuk, E.
Koval'skii, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Protsessy Lit'ya 1999 (1) p. 32-36)Available from British Library Document ...

Influence of temperature conditions in a mould on quality of high - pressure casts

Štrobach, Václav

February 2012

katedra: KSP; rozsah: 123The thesis deals new knowledge about influences between temperature conditi...

Examination of the effect of temperature on physical processes in the material-substrate system in casting from a dispersed melt

Zhuk, G.
Pap, P.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Russian (Probl. Spetsial'noi Elektrometallurgii 1995 (3) p. 32-37)Available from Bri...

Effect of plastic deformation on the properties of forging VAD15 aluminium alloy and welded joints in this alloy

Lukin, V.
Arzamasov, V.
Iod, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Russian (Svar. Proizvod. 1999 36(11) p.6-8)SIGLEAvailable from British Library Docum...

Optimization of conditions for casting of aluminium alloys by diminishing mechanical buckling when furane cores are applied

Dlagnikov, I.
Stoianov, N
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1990

Translated from Bulgarian (Mashinostroene 1988 (5) p. 217-221)Available from British Library Documen...

Effect of plasma reagent treatment of the melt on the microstructure and strength characteristics of aluminium alloys

Narivskiy, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Russian (Protsessy Lit'ya 1997 (2) p. 21-25)SIGLEAvailable from British Library Docu...

Properties of formed Al-alloys in as-cast state

Pelcman, V
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

26.00; Translated from Czech (Hutnik (Prague) 1987 v. 37(7) p. 270-276)Available from British Librar...

Effect of the cooling conditions of the casting on the structure of ductile iron

Vasil'ev, I.
Tan, N.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1999

Translated from Ukrainian (Protessy Lit'ya 1997 (4) p. 100-104)SIGLEAvailable from British Library D...

The optimization of the thermal conditions when moulding casts from the aluminium alloys in metal moulds under natural conditions of its cooling

Churkin Alexei Borisovich

January 1992

The purpose of the work: the development of methods of optimization of the thermal conditions for ca...

Examination of the effect of plasma-reagent treatment of the melt on the strength characteristics of aluminium alloys

Naidek, V.
Minh, L.F.
Narivskii, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 1998

Translated from Ukrainian (Prob. Spets. Elektrometallurgii 1997 (4) p. 32-34)Available from British ...

Thermal analysis of foundry aluminium alloys

Koreny, R.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2001

Translated from Czech (Proceedings of Aluminium-2001, Decin, Czech Republic, Sept. 2001)Available fr...

Effects of the solidification temperature range for iron-carbon alloys and the shape of the space within the mould on pouring time

Golubev, V.B.
Ryzhikov, A.A.
Chukhno, S.A
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1986

22.00; Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (6) p. 118-121)SIGLE...

Effect of processing factors on properties of Al-Mg-Si alloys

Placek, K
Nemethova, L.
Grutkova, J.
Institute of Metals, London (United Kingdom). British Industrial and Scientific International Translation Service

January 1989

22.00; Translated from Czech. (Hutn. Listy 1986 (6) p. 407-411)Available from British Library Docume...

Effect of aluminium on the parameters of eutectic transformation L<->#gamma#+Mo_2C in the Ni-Mo-Al-C quatenary system

Barabash, O.
Legkaya, T.
Petrushin, N.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Poroshk. Metall. 1997 (11-12) p. 111-115)Available from British Library Doc...

Calculating the solidification of castings in hot investment casting moulds with no insulation

Neustruev, A.A.
Gurevich, M.M
British Library Lending Div. (BLLD), Boston Spa (United Kingdom) frueherer Name

January 1987

Translated from Russian (Izv. Vyssh. Uchebn. Zaved., Chern. Metall. 1986 (11) p. 124-125)SIGLEAvaila...

Effect of the temperature of isothermal transformation on the structured properties of austempered high-strength cast iron

Tibul'chuk, E.
Koval'skii, A.
Riecansky (V.E.) Technical Translations, Cambridge (United Kingdom)

January 2000

Translated from Russian (Protsessy Lit'ya 1999 (1) p. 32-36)Available from British Library Document ...

Influence of temperature conditions in a mould on quality of high - pressure casts

Štrobach, Václav

February 2012

katedra: KSP; rozsah: 123The thesis deals new knowledge about influences between temperature conditi...

Effect of the thermophysical parameters of the frozen mould on the casting properties of aluminium alloys

Abstract

Extracted data

Effect of the thermophysical parameters of the frozen mould on the casting properties of aluminium alloys

Abstract

Extracted data

Related items

Related items