An investigation of the relationship between temperature, forces and tool wear in turning and drilling

Lubrication in metal cutting under built-up edge conditions

Silva, M.B. da

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036633 / BLDSC - British Library D...

Researches regarding introducing temperature as a factor in cutting tool wear monitoring

Inţă Marinela
Muntean Achim

January 2018

Monitoring the tool state during the cutting process becomes very important since the introduction o...

Tool contact stresses and chip formation in metal machining

Mahdi, W.I

January 1989

Available from British Library Document Supply Centre- DSC:D91792 / BLDSC - British Library Document...

An investigation of the relationship between temperature, forces and tool wear in turning and drilling

Boud, Fathi M.

Developing a means of predicting tool life has been and continues to be a focus of much research eff...

The abrasive wear of rock drill bit materials

Mouritz, A.P

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:D60817 / BLDSC - British Library Doc...

A study of the wear process related to twin-screw extruders

Grigoroudis, K.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN11485 / BLDSC - British Library Do...

Investigation of drilling parameters indicators

Fasheloum, M.

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN011568 / BLDSC - British Library D...

A parametric study of the performance of graphited lubricants in warm forging

Docker, P.T.

January 2000

Available from British Library Document Supply Centre-DSC:DXN047290 / BLDSC - British Library Docume...

Tool wear monitoring in turning using fused data sets of calibrated acoustic emission and vibration

Prateepasen, A.

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN039660 / BLDSC - British Library D...

Wear resistance of surface treated metal-working tools

Mahmoud, E.A

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D67091/86 / BLDSC - British Library ...

An investigation into the fundamentals of dry sliding wear of cast iron

Prombonas, N

January 1982

SIGLEAvailable from British Library Document Supply Centre- DSC:D43785/82 / BLDSC - British Library ...

An investigation into some aspects of the analytical tool-chip interface temperature distribution, tool wear and tool life in machining mild steel

Sun, E.Y.C.

January 1955

SIGLELD:D45114/83 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Thermal effects in the stability of the machining process

MacManus, B
Brighton Polytechnic (United Kingdom)
Council for National Academic Awards (CNAA), London (United Kingdom)

SIGLEAvailable from British Library Document Supply Centre- DSC:D33775/81 / BLDSC - British Library ...

The effect of temperature on the deformation and wear and tear of diamond

Greenwood, P.F.

January 1998

Available from British Library Document Supply Centre-DSC:DXN027756 / BLDSC - British Library Docume...

A study in abrasive wear under reciprocating sliding conditions

Figgis, D.L.
Manchester Polytechnic (UK)
Council for National Academic Awards, London (UK)

January 1982

SIGLELD:D45177/83 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Lubrication in metal cutting under built-up edge conditions

Silva, M.B. da

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036633 / BLDSC - British Library D...

Researches regarding introducing temperature as a factor in cutting tool wear monitoring

Inţă Marinela
Muntean Achim

January 2018

Monitoring the tool state during the cutting process becomes very important since the introduction o...

Tool contact stresses and chip formation in metal machining

Mahdi, W.I

January 1989

Available from British Library Document Supply Centre- DSC:D91792 / BLDSC - British Library Document...

An investigation of the relationship between temperature, forces and tool wear in turning and drilling

Boud, Fathi M.

Developing a means of predicting tool life has been and continues to be a focus of much research eff...

The abrasive wear of rock drill bit materials

Mouritz, A.P

January 1989

SIGLEAvailable from British Library Document Supply Centre- DSC:D60817 / BLDSC - British Library Doc...

A study of the wear process related to twin-screw extruders

Grigoroudis, K.

January 1996

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN11485 / BLDSC - British Library Do...

Investigation of drilling parameters indicators

Fasheloum, M.

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN011568 / BLDSC - British Library D...

A parametric study of the performance of graphited lubricants in warm forging

Docker, P.T.

January 2000

Available from British Library Document Supply Centre-DSC:DXN047290 / BLDSC - British Library Docume...

Tool wear monitoring in turning using fused data sets of calibrated acoustic emission and vibration

Prateepasen, A.

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN039660 / BLDSC - British Library D...

Wear resistance of surface treated metal-working tools

Mahmoud, E.A

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D67091/86 / BLDSC - British Library ...

An investigation into the fundamentals of dry sliding wear of cast iron

Prombonas, N

January 1982

SIGLEAvailable from British Library Document Supply Centre- DSC:D43785/82 / BLDSC - British Library ...

An investigation into some aspects of the analytical tool-chip interface temperature distribution, tool wear and tool life in machining mild steel

Sun, E.Y.C.

January 1955

SIGLELD:D45114/83 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Thermal effects in the stability of the machining process

MacManus, B
Brighton Polytechnic (United Kingdom)
Council for National Academic Awards (CNAA), London (United Kingdom)

SIGLEAvailable from British Library Document Supply Centre- DSC:D33775/81 / BLDSC - British Library ...

The effect of temperature on the deformation and wear and tear of diamond

Greenwood, P.F.

January 1998

Available from British Library Document Supply Centre-DSC:DXN027756 / BLDSC - British Library Docume...

A study in abrasive wear under reciprocating sliding conditions

Figgis, D.L.
Manchester Polytechnic (UK)
Council for National Academic Awards, London (UK)

January 1982

SIGLELD:D45177/83 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Lubrication in metal cutting under built-up edge conditions

Silva, M.B. da

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036633 / BLDSC - British Library D...

Researches regarding introducing temperature as a factor in cutting tool wear monitoring

Inţă Marinela
Muntean Achim

January 2018

Monitoring the tool state during the cutting process becomes very important since the introduction o...

Tool contact stresses and chip formation in metal machining

Mahdi, W.I

January 1989

Available from British Library Document Supply Centre- DSC:D91792 / BLDSC - British Library Document...

An investigation of the relationship between temperature, forces and tool wear in turning and drilling

Abstract

Extracted data

An investigation of the relationship between temperature, forces and tool wear in turning and drilling

Abstract

Extracted data

Related items

Related items