Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

The performance and selection of pressure reducing valves Part 1

Ratcliffe, B
Water Research Centre, Medmenham (United Kingdom)

January 1986

3.00SIGLEAvailable from British Library Document Supply Centre- DSC:8724.051(WRC-TR--238(pt.1)) / BL...

Technical specification for carbon and carbon manganese steel bends 200 mm nominal size and above produced from pipe by induction bending for operating at pressures above 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B11/E based on specification B11 -September 1996Available from British Library Do...

The Pressure Systems and Transportable Gas Container Regulations Part 1; the Regulations

British Compressed Air Society (BCAS), London (United Kingdom)

January 1988

A guidance and interpretation document for the Health and Safety Commission; Part 1 of 4Available fr...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 1 - 100 mm nominal size and above

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 1 based on specification V6: part 1 - February 1994Available from Brit...

Technical specification for: carbon and carbon manganese steel tees 50 mm to 450 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T2/E based on specification T2 - July 1995SIGLEAvailable from British Library Doc...

Technical specification for: submerged-arc welded pipe 400 mm to 1400 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX1/E based on specification LX1 -September 1993Available from British Library Do...

Testing section for valves in natural gas transport systems

Lembser, G
British Gas Corp., London (United Kingdom)

January 1987

Translated from GermanAvailable from British Library Document Supply Centre- DSC:9022.04812(BG-ERS-T...

Technical specification for carbon and carbon manganese steel reducers 50 mm to 1050 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F3/E based on specification F3 - April 1993Available from British Library Documen...

Technical specification for seamless pipe 150 mm to 450 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX4/E based on specification LX4 - April 1993Available from British Library Docum...

Technical specification for seamless pipe 40 mm to 100 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(L1/E) / BLDSC - British Lib...

Testing section for valves in natural gas transport systems - experience, findings, prospects

Lembser, G
British Gas Corp., London (United Kingdom)

January 1987

Translated from GermanAvailable from British Library Document Supply Centre- DSC:9022.04812(BG-ERS-T...

Steel pipelines for high pressure gas transmission

Institution of Gas Engineers, London (United Kingdom)

January 2001

Recommendations on Transmission and Distribution Practice, IGE/TD/1 edition 4Available from British ...

Technical specification for carbon and carbon manganese steel bends 50 mm to 400 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(B4/E) / BLDSC - British Lib...

Technical specification for carbon and carbon manganese steel bends equal to or greater than 450 mm nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B7/E based on specification B7 - July 1993SIGLEAvailable from British Library Doc...

Steel pipelines for high pressure gas transmission Uprating of pipelines to a design factor of up to 0.8

Institution of Gas Engineers, London (United Kingdom)

January 2000

Recommendations on Transmission and Distribution Practice, IGE/TD/1 edition 3 supplement 3. To be re...

The performance and selection of pressure reducing valves Part 1

Ratcliffe, B
Water Research Centre, Medmenham (United Kingdom)

January 1986

3.00SIGLEAvailable from British Library Document Supply Centre- DSC:8724.051(WRC-TR--238(pt.1)) / BL...

Technical specification for carbon and carbon manganese steel bends 200 mm nominal size and above produced from pipe by induction bending for operating at pressures above 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B11/E based on specification B11 -September 1996Available from British Library Do...

The Pressure Systems and Transportable Gas Container Regulations Part 1; the Regulations

British Compressed Air Society (BCAS), London (United Kingdom)

January 1988

A guidance and interpretation document for the Health and Safety Commission; Part 1 of 4Available fr...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 1 - 100 mm nominal size and above

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 1 based on specification V6: part 1 - February 1994Available from Brit...

Technical specification for: carbon and carbon manganese steel tees 50 mm to 450 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T2/E based on specification T2 - July 1995SIGLEAvailable from British Library Doc...

Technical specification for: submerged-arc welded pipe 400 mm to 1400 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX1/E based on specification LX1 -September 1993Available from British Library Do...

Testing section for valves in natural gas transport systems

Lembser, G
British Gas Corp., London (United Kingdom)

January 1987

Translated from GermanAvailable from British Library Document Supply Centre- DSC:9022.04812(BG-ERS-T...

Technical specification for carbon and carbon manganese steel reducers 50 mm to 1050 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F3/E based on specification F3 - April 1993Available from British Library Documen...

Technical specification for seamless pipe 150 mm to 450 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX4/E based on specification LX4 - April 1993Available from British Library Docum...

Technical specification for seamless pipe 40 mm to 100 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(L1/E) / BLDSC - British Lib...

Testing section for valves in natural gas transport systems - experience, findings, prospects

Lembser, G
British Gas Corp., London (United Kingdom)

January 1987

Translated from GermanAvailable from British Library Document Supply Centre- DSC:9022.04812(BG-ERS-T...

Steel pipelines for high pressure gas transmission

Institution of Gas Engineers, London (United Kingdom)

January 2001

Recommendations on Transmission and Distribution Practice, IGE/TD/1 edition 4Available from British ...

Technical specification for carbon and carbon manganese steel bends 50 mm to 400 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(B4/E) / BLDSC - British Lib...

Technical specification for carbon and carbon manganese steel bends equal to or greater than 450 mm nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B7/E based on specification B7 - July 1993SIGLEAvailable from British Library Doc...

Steel pipelines for high pressure gas transmission Uprating of pipelines to a design factor of up to 0.8

Institution of Gas Engineers, London (United Kingdom)

January 2000

Recommendations on Transmission and Distribution Practice, IGE/TD/1 edition 3 supplement 3. To be re...

The performance and selection of pressure reducing valves Part 1

Ratcliffe, B
Water Research Centre, Medmenham (United Kingdom)

January 1986

3.00SIGLEAvailable from British Library Document Supply Centre- DSC:8724.051(WRC-TR--238(pt.1)) / BL...

Technical specification for carbon and carbon manganese steel bends 200 mm nominal size and above produced from pipe by induction bending for operating at pressures above 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B11/E based on specification B11 -September 1996Available from British Library Do...

The Pressure Systems and Transportable Gas Container Regulations Part 1; the Regulations

British Compressed Air Society (BCAS), London (United Kingdom)

January 1988

A guidance and interpretation document for the Health and Safety Commission; Part 1 of 4Available fr...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

Abstract

Extracted data

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

Abstract

Extracted data

Related items

Related items