Technical specification for carbon and carbon manganese steel bends equal to or greater than 450 mm nominal size for operating pressures greater than 7 bar

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 2 based on the specification V6: part 2 - April 1994Available from Bri...

The hot ductility of steels

Crowther, D.N

January 1986

Available from British Library Document Supply Centre- DSC:D69945/86 / BLDSC - British Library Docum...

Deformation of ordered alloys

Crawford, R.C

January 1971

Available from British Library Document Supply Centre- DSC:D74567/87 / BLDSC - British Library Docum...

Technical specification for carbon and carbon manganese steel bends 50 mm to 400 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(B4/E) / BLDSC - British Lib...

Technical specification for carbon and carbon manganese steel bends 200 mm nominal size and above produced from pipe by induction bending for operating at pressures above 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B11/E based on specification B11 -September 1996Available from British Library Do...

Technical specification for carbon and carbon manganese steel reducers 50 mm to 1050 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F3/E based on specification F3 - April 1993Available from British Library Documen...

Technical specification for carbon and carbon manganese steel forgings and forged components for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F1/E based on specification F1 - February 1993Available from British Library Docu...

Technical specification for: carbon and carbon manganese steel tees 50 mm to 450 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T2/E based on specification T2 - July 1995SIGLEAvailable from British Library Doc...

Technical specification for carbon and carbon manganese steel tees equal to or greater than 450 mm nominal size produced from plate for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T1/E based on specification T1 - February 1994Available from British Library Docu...

Technical specification for carbon and carbon manganese steel butt welding end caps

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F8/E based on specification F8 - February 1993Available from British Library Docu...

The behaviour of carbon steels at high strain rates and strain limits

Health and Safety Executive, London (United Kingdom)
BOMEL Limited, Maidenhead (United Kingdom)

January 2000

SIGLEAvailable from British Library Document Supply Centre-DSC:6244.385(1999 018) / BLDSC - British ...

The thermomechanical properties of 224-carbon steel at high strain rates

Dixon, P.R

January 1990

SIGLEAvailable from British Library Document Supply Centre- DSC:DX78419 / BLDSC - British Library Do...

British and foreign specifications for steel castings

Steel Castings Research and Trade Association, London (UK)

January 1980

30.00LD:f81/0297 / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Technical specification for: submerged-arc welded pipe 400 mm to 1400 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX1/E based on specification LX1 -September 1993Available from British Library Do...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 1 - 100 mm nominal size and above

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 1 based on specification V6: part 1 - February 1994Available from Brit...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 2 based on the specification V6: part 2 - April 1994Available from Bri...

The hot ductility of steels

Crowther, D.N

January 1986

Available from British Library Document Supply Centre- DSC:D69945/86 / BLDSC - British Library Docum...

Deformation of ordered alloys

Crawford, R.C

January 1971

Available from British Library Document Supply Centre- DSC:D74567/87 / BLDSC - British Library Docum...

Technical specification for carbon and carbon manganese steel bends 50 mm to 400 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(B4/E) / BLDSC - British Lib...

Technical specification for carbon and carbon manganese steel bends 200 mm nominal size and above produced from pipe by induction bending for operating at pressures above 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B11/E based on specification B11 -September 1996Available from British Library Do...

Technical specification for carbon and carbon manganese steel reducers 50 mm to 1050 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F3/E based on specification F3 - April 1993Available from British Library Documen...

Technical specification for carbon and carbon manganese steel forgings and forged components for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F1/E based on specification F1 - February 1993Available from British Library Docu...

Technical specification for: carbon and carbon manganese steel tees 50 mm to 450 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T2/E based on specification T2 - July 1995SIGLEAvailable from British Library Doc...

Technical specification for carbon and carbon manganese steel tees equal to or greater than 450 mm nominal size produced from plate for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T1/E based on specification T1 - February 1994Available from British Library Docu...

Technical specification for carbon and carbon manganese steel butt welding end caps

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F8/E based on specification F8 - February 1993Available from British Library Docu...

The behaviour of carbon steels at high strain rates and strain limits

Health and Safety Executive, London (United Kingdom)
BOMEL Limited, Maidenhead (United Kingdom)

January 2000

SIGLEAvailable from British Library Document Supply Centre-DSC:6244.385(1999 018) / BLDSC - British ...

The thermomechanical properties of 224-carbon steel at high strain rates

Dixon, P.R

January 1990

SIGLEAvailable from British Library Document Supply Centre- DSC:DX78419 / BLDSC - British Library Do...

British and foreign specifications for steel castings

Steel Castings Research and Trade Association, London (UK)

January 1980

30.00LD:f81/0297 / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Technical specification for: submerged-arc welded pipe 400 mm to 1400 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX1/E based on specification LX1 -September 1993Available from British Library Do...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 1 - 100 mm nominal size and above

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 1 based on specification V6: part 1 - February 1994Available from Brit...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 2 based on the specification V6: part 2 - April 1994Available from Bri...

The hot ductility of steels

Crowther, D.N

January 1986

Available from British Library Document Supply Centre- DSC:D69945/86 / BLDSC - British Library Docum...

Deformation of ordered alloys

Crawford, R.C

January 1971

Available from British Library Document Supply Centre- DSC:D74567/87 / BLDSC - British Library Docum...

Technical specification for carbon and carbon manganese steel bends equal to or greater than 450 mm nominal size for operating pressures greater than 7 bar

Abstract

Extracted data

Technical specification for carbon and carbon manganese steel bends equal to or greater than 450 mm nominal size for operating pressures greater than 7 bar

Abstract

Extracted data

Related items

Related items