Technical specification for seamless pipe 150 mm to 450 mm inclusive nominal size for operating pressures greater than 7 bar

Manual for polyethylene pipe systems for water supply applications

Gimmler, E.
Farrage, R.
Taghani, N
WRc plc, Medmenham (United Kingdom)

January 1994

SIGLEAvailable from British Library Document Supply Centre-DSC:9364.584873(WRC-FR--0386) / BLDSC - B...

Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive

Engineering Equipment and Materials Users Association, London (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:7059.440(no 202) / BLDSC - British Li...

Steel tubes and pipes

MBA Market Information, Wigan (United Kingdom)

January 1989

130.00Available from British Library Document Supply Centre- DSC:7537.77(MBA-R--952) / BLDSC - Briti...

Technical specification for seamless pipe 40 mm to 100 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(L1/E) / BLDSC - British Lib...

Technical specification for: submerged-arc welded pipe 400 mm to 1400 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX1/E based on specification LX1 -September 1993Available from British Library Do...

Technical specification for carbon and carbon manganese steel bends 50 mm to 400 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(B4/E) / BLDSC - British Lib...

Technical specification for: carbon and carbon manganese steel tees 50 mm to 450 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T2/E based on specification T2 - July 1995SIGLEAvailable from British Library Doc...

Technical specification for: insulation joints Part 1 - joints equal to or greater than 80 mm nominal size operating at pressures greater than 7 bar for class ratings 150, 300 and 600

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as E17/E: part 1 based on specification E17: part 1 - January 1994Available from Bri...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 1 - 100 mm nominal size and above

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 1 based on specification V6: part 1 - February 1994Available from Brit...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 2 based on the specification V6: part 2 - April 1994Available from Bri...

Technical specification for carbon and carbon manganese steel bends 200 mm nominal size and above produced from pipe by induction bending for operating at pressures above 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B11/E based on specification B11 -September 1996Available from British Library Do...

Technical specification for carbon and carbon manganese steel reducers 50 mm to 1050 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F3/E based on specification F3 - April 1993Available from British Library Documen...

Manual for PVC pressure pipe systems

Stephens, J.
Farrage, R.
WRc plc, Medmenham (United Kingdom)

January 1994

SIGLEAvailable from British Library Document Supply Centre-DSC:f98/1012 / BLDSC - British Library Do...

Technical specification for carbon and carbon manganese steel bends equal to or greater than 450 mm nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B7/E based on specification B7 - July 1993SIGLEAvailable from British Library Doc...

Plastics in pressure pipes

Stafford, T.
Rapra Technology Ltd., Shrewsbury (United Kingdom)

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:7291.760(9/6) / BLDSC - British Libra...

Manual for polyethylene pipe systems for water supply applications

Gimmler, E.
Farrage, R.
Taghani, N
WRc plc, Medmenham (United Kingdom)

January 1994

SIGLEAvailable from British Library Document Supply Centre-DSC:9364.584873(WRC-FR--0386) / BLDSC - B...

Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive

Engineering Equipment and Materials Users Association, London (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:7059.440(no 202) / BLDSC - British Li...

Steel tubes and pipes

MBA Market Information, Wigan (United Kingdom)

January 1989

130.00Available from British Library Document Supply Centre- DSC:7537.77(MBA-R--952) / BLDSC - Briti...

Technical specification for seamless pipe 40 mm to 100 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(L1/E) / BLDSC - British Lib...

Technical specification for: submerged-arc welded pipe 400 mm to 1400 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as LX1/E based on specification LX1 -September 1993Available from British Library Do...

Technical specification for carbon and carbon manganese steel bends 50 mm to 400 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:8726.7925(B4/E) / BLDSC - British Lib...

Technical specification for: carbon and carbon manganese steel tees 50 mm to 450 mm inclusive nominal size produced from seamless pipe for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as T2/E based on specification T2 - July 1995SIGLEAvailable from British Library Doc...

Technical specification for: insulation joints Part 1 - joints equal to or greater than 80 mm nominal size operating at pressures greater than 7 bar for class ratings 150, 300 and 600

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as E17/E: part 1 based on specification E17: part 1 - January 1994Available from Bri...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 1 - 100 mm nominal size and above

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 1 based on specification V6: part 1 - February 1994Available from Brit...

Technical specification for: steel valves for use with natural gas at normal operating pressures above 7 bar Part 2 - 80 mm nominal size and below

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as V6/E: part 2 based on the specification V6: part 2 - April 1994Available from Bri...

Technical specification for carbon and carbon manganese steel bends 200 mm nominal size and above produced from pipe by induction bending for operating at pressures above 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B11/E based on specification B11 -September 1996Available from British Library Do...

Technical specification for carbon and carbon manganese steel reducers 50 mm to 1050 mm inclusive nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as F3/E based on specification F3 - April 1993Available from British Library Documen...

Manual for PVC pressure pipe systems

Stephens, J.
Farrage, R.
WRc plc, Medmenham (United Kingdom)

January 1994

SIGLEAvailable from British Library Document Supply Centre-DSC:f98/1012 / BLDSC - British Library Do...

Technical specification for carbon and carbon manganese steel bends equal to or greater than 450 mm nominal size for operating pressures greater than 7 bar

Advantica Technologies Ltd, Loughborough (United Kingdom)

January 2001

First published as B7/E based on specification B7 - July 1993SIGLEAvailable from British Library Doc...

Plastics in pressure pipes

Stafford, T.
Rapra Technology Ltd., Shrewsbury (United Kingdom)

January 1998

SIGLEAvailable from British Library Document Supply Centre-DSC:7291.760(9/6) / BLDSC - British Libra...

Manual for polyethylene pipe systems for water supply applications

Gimmler, E.
Farrage, R.
Taghani, N
WRc plc, Medmenham (United Kingdom)

January 1994

SIGLEAvailable from British Library Document Supply Centre-DSC:9364.584873(WRC-FR--0386) / BLDSC - B...

Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive

Engineering Equipment and Materials Users Association, London (United Kingdom)

January 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:7059.440(no 202) / BLDSC - British Li...

Steel tubes and pipes

MBA Market Information, Wigan (United Kingdom)

January 1989

130.00Available from British Library Document Supply Centre- DSC:7537.77(MBA-R--952) / BLDSC - Briti...

Technical specification for seamless pipe 150 mm to 450 mm inclusive nominal size for operating pressures greater than 7 bar

Abstract

Extracted data

Technical specification for seamless pipe 150 mm to 450 mm inclusive nominal size for operating pressures greater than 7 bar

Abstract

Extracted data

Related items

Related items